Injection molding machine

KraussMaffei KM 651-6100 GX

Injection Moulding Machine – Krauss Maffei KM 651-6100 GX
Year of manufacture: 2025

Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen.
PV – injection unit pressure regulation.
MC6 control system based on an industrial PC using real-time Ethernet technology, equipped with an integrated 21.5” operator panel with a color touchscreen display.

Plasticizing unit
Dcodpfx Agjxdd U Dj Ior

Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with non-return valve and open nozzle

Nozzle radius: 25 mm

Nozzle opening: 9 mm

Technical data (standard version)

Clamping unit

Clamping force: 6500 kN

Opening force: 455 kN

Platen dimensions (H x V): 1660 x 1530 mm

Tie bar spacing (H x V): 1200 x 1020 mm

Clamping stroke: 1450 mm

Mould height (min.–max.): 450 – 1000 mm

Daylight: 1900 mm

Ejector stroke: 300 mm

Ejector force forward/reverse: 140 / 70 kN

Injection unit

Screw diameter: 95 mm

L/D ratio: 23.0

Injection pressure: 1795 bar

Injection volume: 3367 cm³

Shot weight (PS): 2391 g

Injection speed: 110 mm/s

Injection flow rate: 780 cm³/s

Screw speed (standard): 147 rpm

Plasticizing capacity (standard screw speed): 102 g/s

Nozzle contact force: 166 kN

Electro-hydraulic system

Pump motor power: 97 kW

Installed heater power: 54 kW

Number of cylinder heating zones: 7

Dry cycle time (Euromap 6): 3.3 s / 840 mm

Dry cycle time (KM standard): 2.9 s / 600 mm

Oil tank capacity: 1435 liters

Linear robot – Krauss-Maffei LRX 250

Payload capacity < 25 kg (gripper + drives + parts)

Part removal on the operator-offside

Axes:

X axis (from mould): 900 mm, servo motor
Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servo motor
Z axis (transversal): 2500 mm, servo motor

Dimensions and weight

Net weight (incl. control cabinet): 38.5 t

Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.