Injection molding machine

KraussMaffei KM 201-380 PX

KRAUSSMAFFEI KM 201-380 PX electric injection molding machine
Year of manufacture: 2020
Operating hours: 21,849 h
Nsdpfsz Szncjx Al Nown
Clamping force: 2,000 kN (200 tons)
Control system: MC6 Drive system: servo-electric with servo-hydraulic components
Machine characteristics
• Five-point, double toggle mechanism for the clamping unit, three-platen design.
• Servo-electric drive for the clamping unit.
• Servo-electric drive for injection and plasticizing.
• Servo-hydraulic drive for the injection unit movement.
• MC6 control system based on an industrial computer with real-time Ethernet communication.
• Plasticizing unit for thermoplastics with a 40 mm diameter screw.
Clamping unit
Parameter Value
Clamping force 2,000 kN (200 t)
Mold opening force 300 kN
Mounting plate dimensions (H × V) 870 × 820 mm
Distance between columns (H × V) 635 × 585 mm
Mold opening stroke 500 mm
Minimum mold height 250 mm
Maximum mold height 550 mm
Maximum plate clearance 1,050 mm
Ejector stroke 200 mm
Ejector force forward / backward 39 / 19 kN
Ejector speed 350 mm/s
Injection unit
Parameter Value
Screw diameter 40 mm
L/D ratio 20:1
Maximum injection pressure 1,860 bar
Injection volume 201 cm³
Injection shot weight 183 g
Injection speed 125 mm/s
Injection rate 157 cm³/s
Maximum screw speed 334 rpm
Plasticizing rate 24.7 g/s
Screw torque 337 Nm
Nozzle clamping force 34 kN
Nozzle radius 10 mm
Nozzle orifice diameter 4 mm
Electrical and hydraulic parameters
Parameter Value
Connected load 13.8 kW
Electrical protection 63 A
Installed heater power 11.5 kW
Number of cylinder heating zones 5
Dry cycle time according to EUROMAP 6 2.0 s / 445 mm
Oil tank capacity 200 l
Weight and dimensions
Parameter Value
Net weight with control cabinet 14,300 kg
Machine length 6,120 mm
Machine width 2,170 mm
Machine height 2,210 mm

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.