Injection moulding machineKraussMaffei
KM 175 - 700 C1
Injection moulding machine
KraussMaffei
KM 175 - 700 C1
سال ساخت
۲۰۰۳
وضعیت
کارکرده
موقعیت
Eschweiler 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Injection moulding machine
- تولید کننده:
- KraussMaffei
- مدل:
- KM 175 - 700 C1
- سال ساخت:
- ۲۰۰۳
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۶۸٬۵۰۰ h
قیمت و مکان
- موقعیت:
- Hermann - Hollerith Str. 9, 52249 Eschweiler, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A21233887
- شماره مرجع:
- 14374
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۴.۱۱.۱۴۰۴
توضیحات
Clamping force 1750 kN
Mould opening force, max. 101 kN
Travel force movable platen opening 50 kN
Travel force movable platen closing 42 kN
Size of mould platens (h x v) 915 x 915 mm
Distance between tie bars (h x v) 560 x 560 mm
Mould opening stroke 700 mm
Mould height min 350 mm
Max. daylight 1050 mm
Hydraulic ejector - stroke 200 mm
Ejector force 58/28 kN
Injection unit:
Screw diameter 50 mm
Ls/D ratio 20
Injection pressure 1892 bar
Stroke volume 377 ccm
Shot weight (PS) 343 gr.
Injection rate 247 ccm/s
Screw speed 342 1/min
Plasticising rate max. 37 g/s
Nozzle pressure 84 kN
Electric and Hydraulic Equipment:
Nominal capacity of pump motor 30 kW
Ihedpfx Asykah Uoh Seu
Installed heating capacity 16 kW
Adjustable barrel heating zones 5
Reservoir capacity 525 ltr.
Dimensions and weights:
Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m
Total machine weight 10.530 kg
Max. mould weight 2535 kg
Accessories:
- Anti vibration pads
Additional Options:
- 1 x air valve
- 1 x hydr. core pull
- Robot interface according to Euromap 12
Mould opening force, max. 101 kN
Travel force movable platen opening 50 kN
Travel force movable platen closing 42 kN
Size of mould platens (h x v) 915 x 915 mm
Distance between tie bars (h x v) 560 x 560 mm
Mould opening stroke 700 mm
Mould height min 350 mm
Max. daylight 1050 mm
Hydraulic ejector - stroke 200 mm
Ejector force 58/28 kN
Injection unit:
Screw diameter 50 mm
Ls/D ratio 20
Injection pressure 1892 bar
Stroke volume 377 ccm
Shot weight (PS) 343 gr.
Injection rate 247 ccm/s
Screw speed 342 1/min
Plasticising rate max. 37 g/s
Nozzle pressure 84 kN
Electric and Hydraulic Equipment:
Nominal capacity of pump motor 30 kW
Ihedpfx Asykah Uoh Seu
Installed heating capacity 16 kW
Adjustable barrel heating zones 5
Reservoir capacity 525 ltr.
Dimensions and weights:
Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m
Total machine weight 10.530 kg
Max. mould weight 2535 kg
Accessories:
- Anti vibration pads
Additional Options:
- 1 x air valve
- 1 x hydr. core pull
- Robot interface according to Euromap 12
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2007
ارسال درخواست
تلفن & فکس
+49 2403 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است










