Injection molding machine

KraussMaffei KM 160-750 CX nur 24.600 h

Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade:

We also purchase well-maintained injection molding machines, starting from the current model year 2010.
We have been a wholesaler of used injection molding machines for over 25 years.

Due to recent developments - tax information and advantage for the used machine:

From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine.
Keyword: Growth booster, (§ 7 paragraph 2 EStG-E)

Manufacturer: KraussMaffei
Type: KM 160-750
Control: MC5
Year: 2008
Machine No.: 61011790
Operating Hours: 24,600 h

Injection Unit
Injection unit/screw: 50 mm
Injection volume: 393 ccm
Injection weight: 358 g
Iedpfx Ajz A Iareftjbb

Heating zones: 5
Nozzle stroke: 350 mm
Injection pressure: 1892 bar
Heating power: 16 kW

Clamping Unit
Tie bar spacing: 520 x 520 mm
Platen size: 820 x 845 (h x v)
Clamping force: 160 tons / 1600 kN
Opening stroke: 650 mm
Maximum platen distance: 950 mm
Minimum tool mounting height: 300 mm
Ejector stroke: 150 mm

Weight: 6,600 kg
Pump motor: 22 kW

Dimensions: approx. 4.90 m × 1.60 m × 2.10 m

Extras
-Wedge shoe machine mounting
-Hydraulic screw back-rotation lock
-Hydraulic screw drive with standard speed
-Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil).
-Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet.
-Nozzle protection door on the operator side, hinged
-Ejector area protection door on the operator side, hinged
-Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500)
-End position "rear" of the ejector and the tool ejector plate monitored in sequence
-Chrome-plated tie bars for the clamping unit and injection unit

-Media monitor in the pump room for oil pan monitoring
-Enlarged oil cooler for a maximum water supply temperature of 31°C.

-Hydraulic core pull control 1-way on the non-operator side.

-Water manifold 8-way
-12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5.
-Ejection of the cooled nozzle tip
-Fan on the control cabinet
-Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor)
-1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version.
-Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device.
-Event log for continuous recording and retrospective analysis
-Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed.
-Z-cycle time analysis, cycle storage
-Language: German, Greek

Visible peripherals are not included in the scope of supply.

Free loading ex our warehouse in Hanover - worldwide delivery possible on request.
Inspection under power possible by arrangement.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.