Injection molding machineKraussMaffei
KM 160-1000 PX MC6

اطلاعات دستگاه
- نام دستگاه:
- Injection molding machine
- تولید کننده:
- KraussMaffei
- سال ساخت:
- ۲۰۱۸
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۹٬۵۸۵ h
جزئیات فنی
- نیروی گیرهگیری:
- ۱٬۶۰۰ کیلو نیوتن
- قطر پیچ:
- ۵۵ میلیمتر
- فشار تزریق:
- ۱٫۹۰۴ میله
- وزن کل:
- ۱۰٬۹۰۰ کیلوگرم
- فشار:
- ۱٫۹۰۴ میله
ارائه
- موقعیت:
- Nordrhein-Westfalen, آلمان
– فاصله: حدود ۴٬۳۰۶ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- FCA
€۳۵۰٫۰۰ (الزامی)
رایگان
توضیحات
TECHNICAL DETAILS
Operating hours
Operating hours: 9,585 h
Closing side
Drive type: Hybrid
Closing type: Toggle lever
Construction: four-bar
Closing force: 1,600 kN
Panel size (h x v): 710 mm x 660 mm
Rail dimensions (h x v): 520 mm x 470 mm
Installation height: 200 mm / 600 mm
Opening stroke: 1,050 mm
Ejector stroke: 150 mm
Ejector force: 33 Nm
Centering D movable plate: 120 mm
Centering D fixed plate: 120 mm
Dimensions (LxWxH): 6,700 mm x 1,600 mm x 2,300 mm
Total weight: 10,900 kg
Injection side
Screw diameter: 55 mm
Stroke volume: 523 cm³
Injection pressure: 1,904 bar
L/D ratio: 18
Screw geometry: 9
Screw speed: 243 1/min
Screw torque: 827 Nm
Plasticizing system: 43 g/s PS
Injection flow into the atmosphere: 297 cm³/s
Number of heating zones: 6
Nozzle delivery force: 50 kN
Voltage: 400 V / 50 Hz
EQUIPMENT
- On-screen text in German
- CEE socket 16A
- CEE socket 32A
- Pressure accumulator for increased injection capacity
- 3 freely programmable inputs and outputs each
- Core pull pneumatic 2x
- Machine with water battery
- Machine without material hopper
- Leveling elements
- Interface for deaerator
- Interface for temperature control unit
- USB interface
- Schuko socket 10A
- Low-wear plasticizing unit
- mold heating 24x
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A17722238
- شماره مرجع:
- AUC-2411011
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۲.۰۹.۱۴۰۳
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.