Injection molding machine

KraussMaffei Technologies GmbH KM 901 / 1400 / 750 GXZ G02

Injection molding machines directly from the manufacturer!

As a manufacturer, KraussMaffei offers you our inspected and versatile stock machines:

The hydromechanical two-platen clamping unit of the GX machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are ideally absorbed and the service life of the molds is increased. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces.

TECHNICAL DATA:
KM 901 / 1400 / 750 GXZ G02 (Order 38618417)
CONTROL
 MC6 with 21.5" TFT color screen and multi-touch function

CLAMPING UNIT
 Clamping force kN 9000
 Mold opening force, max kN 630
 Daylight (h x v) mm 1440 x 1190
 Platen size (h x v) mm 1950 x 1750
 Minimum to maximum mold height mm 540 – 1540
 Mold opening distance mm 2340
 Maximum mold opening stroke mm 1800
 Maximum mold weight kg 20000

INJECTION UNIT 1 - SP1400
 Screw diameter / type mm 55 / Standard
 Effective L/D ratio 21.8
 Injection pressure bar 2387
 Stroke volume cm³ 570
 Shot weight at max. stroke for PS g 519
 Injection speed mm/s 150
 Injection flow rate cm³/s 356
 Screw drive / speed 1/min 310
 Plasticizing rate (standard screw)4) g/s 58.8
 Nozzle mounting force kN 82

INJECTION UNIT 2 - SP750
 Screw diameter / type mm 45 / Standard
 Effective L/D ratio 22.4
 Injection pressure bar 2336
 Stroke volume cm³ 318
Chodpfs Afdlcjx Afgsd
 Shot weight at max. stroke for PS g 289
 Injection speed mm/s 140
 Injection flow rate cm³/s 223
 Screw drive / speed 1/min 370
 Plasticizing rate (standard screw)4) g/s 40.9
 Nozzle mounting force kN 50

ELECTRICAL PARAMETERS
  Power supply V / Hz 400 / 50 with neutral conductor

ADDITIONAL EQUIPMENT

 BluePower servopump drive
 Integrated rotary table, movable platen, D 1830 mm
 Euromap AW platen + AW positions ± (280.0) ± (0.280)
 12x cooling water circuits ½” 85°C on the rotary table
 10x cooling water circuits ¾” 85°C FWAP
 Nozzle spacing SP1400 – SP750 300 mm
 Wear-resistant plasticizing unit (ZE23.00)
 Core pull, hydraulic 4+4
 Air valves 2+2
 Hydraulic cascade 8
 Pneumatic cascade 26
 Euromap interfaces E18, E67
 Hot runner control zones 64

The machine is located at our plant in Parsdorf and will be available from week 09, 2025. Further optional equipment can be offered upon request.

We look forward to receiving your inquiry.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.