Drilling and milling machine

Kami BKM5050V

Absolutely new machine with automatic feed in 6 different feed levels
Drilling up to 50mm, milling up to 80mm and thread cutting up to M30

Incl. tool cabinet with various accessories, drill grinder, drill sets, machine spirit level, drill chuck, clamping tool range and a high-quality machine vice.
See pictures.

The machine is absolutely new and very well maintained. It was only purchased for one job, which was completed after 50 working hours.

After that, the machine was used every now and then for smaller jobs.
The machine can be inspected and tested while it is powered.

We can organize transport for you if you wish.

Technical details:

» Machine base with T-slots for clamping high workpieces
» Frequency-controlled drive motor
» Digital depth gauge
» Drilling table with T-slots
» Simple and quick speed changes using potentiometer
» Work table can be swiveled 50° L/R
» Extremely smooth running thanks to hardened, ground gears running in an oil bath
» Thread cutting function
» Electromagnetic clutch for drilling feed
» Automatic feed
» Electromotoric table height adjustment

High-quality pillar drill for industrial use.
The machine is also suitable for multi-shift operation.
automatic spindle feed,
digital depth display,
coolant device, LED operating light,
electric table drive,
German operating instructions,
CE declaration of conformity

Max. drilling diameter (steel) mm: 50
Max. thread cutting diameter (steel) mm: M30
Max. milling cutter diameter (steel) mm: 80
Distance between spindle axis and column axis mm: 360
Max. distance between spindle end and table surface (manual/motorized) mm: 550/565
Max. distance between spindle end and base table surface mm: 1165
Max. stroke of spindle mm: 220
Spindle mount: Morse MT4
Spindle speed range rpm: 50~2200
Number of spindle feed levels: 6
Spindle feed range mm/rev: 0.08~0.5
Max. stroke of work table and its holder (manual/motorized) mm: 530/410
Angle of rotation of the headstock in the horizontal axis degrees: ±45°
Working surface of the work table (L x W) mm: 580×460
Working surface of the base table (L x W) mm: 445×435
Number and width of T-slots for the base table mm: 3-T14, 2-T14
Diameter of the column mm: φ180
Power and speed of the main motor kW, rpm: 3 ; 1400
Power and flow rate of the coolant pump kW, L/min: 0.18 / 6
Machine dimensions (L x W x H) mm: 970×680×2340
Hedpfx Acevvk Aveysnu
Net weight of the machine kg: 670/730

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.