KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
سال ساخت
۲۰۱۷
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Rastdorf 

اطلاعات پایه
- نام دستگاه:
- KBA40/11000
- تولید کننده:
- Jansen Maschinen GmbH
- مدل:
- KBA40/11000
- شماره دستگاه:
- 17.018.011
- سال ساخت:
- ۲۰۱۷
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Rastdorf, آلمان

تماس بگیرید
جزئیات فنی
اسپیندلها
حداکثر سرعت اسپیندل:
۳٬۰۰۰ دور/دقیقه
جزئیات قدرت
ولتاژ ورودی:
۳۸۰ V
نوع جریان ورودی:
سه فاز
مستندسازی و گواهینامه
مستندات / راهنما
مواد/محصولات قابل پردازش
حداکثر وزن قطعه کار:
۳٬۵۰۰ کیلوگرم
مشخصات محور
مسافت جابجایی محور X:
۱۱٬۰۰۰ میلیمتر
مسافت حرکت محور Y:
۵۰۰ میلیمتر
مسافت حرکت محور Z:
۵۰۰ میلیمتر
حرکت سریع محور Z:
۵ متر/دقیقه
حرکت سریع محور X:
۲۰ متر/دقیقه
حرکت سریع محور Y:
۱۰ متر/دقیقه
جزئیات بیشتر
ظرفیت حفاری:
۴۰ میلیمتر
سرعت چرخش به طور نامحدود قابل تنظیم
جزئیات پیشنهاد
- شناسه آگهی:
- A23345423
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۶.۰۸.۱۴۰۵
توضیحات
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Kdjdpfx Ake Akrkteiow
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Kdjdpfx Ake Akrkteiow
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین حضور آنلاین: دیروز
ثبت شده از: 2026
۲ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 5956 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است














