Index G200 C

Index G200 C

This 5-axis Index G200 C turn-mill centre was manufactured in 2000. Consider the opportunity to buy this Index G200 C turn-mill centre. Contact us for more information.

Additional equipment


• Synchronous device for counter spindle machining

• Tool carrier 3 for synchronous spindle (rear end machining)

• Additional milling spindle

• Thread milling and polygon turning device

• Gripperless tool changer (6 tools, HKS-50 B, KM40)

• Workpiece handling WHU100

Machine Benefits

Technical Machine Benefits


• Space requirement (without material guide): 3580 x 3108 mm

• Control unit: resolution: 0. 001 mm (input/output/correction)

• Comprehensive movement range with multiple axes configuration

• High precision with 0. 001 mm resolution in numerical control

• Versatile expansion stages and additional equipment for enhanced functionality

Extra Information

Movement
Cross slide 1 (top) - XYZB axes:
X-axis: Slide path 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm
Y-axis: Slide travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm
Z-axis: Slide path 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm
B-axis (rotating): 360° swivel range, angular steps 5° (with locking), resolution 0.001° (with clamping), switching time for 180°: 1 s
Cross slide 2 (bottom) - XZ axes:
X-axis: Slide travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm
Z-axis: Slide path 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm

Turret
Turret right:
X-axis: Slide path 120 mm
Z-axis: Slide travel 400 mm

Tail Stock
Center distance: 400 mm
Pressure force (max): 5500 N
Drive: Hydraulic or electric

Media
Power supply:
400 V, 50/60 Hz
Connected load: 20-45 kVA
Current consumption: 35-80 A

Hydraulic system:
Delivery rate: 18 l/min
System pressure: 90 bar
Filling capacity: 70 liters

Cooling lubricant system:
Ihodpoyailzsfx Aazjt
Pump capacity (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar
Filling quantity: Approx. 230 liters

Chip conveyor: Hinged belt or scraper
Workpiece holder: Main spindle: DB5 internal mount / D140 external mount, optional short taper
Counter spindle: D140 external mount (only tensile clamping permitted for collet and chuck clamping)

1st spindle data (main/counter spindle):
Spindle clearance (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm
Spindle Ø in front bearing: 75 mm (with 30 mm clearance) / 85 mm (42 mm) / 100 mm (60+65 mm)
Speed (max): 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm)
Spindle nose: ISO 702/1 (size 4 or 5)
Chip diameter (workpiece Ø): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm)
Torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm)
Power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm)

Dimensions
Machine Depth 3580 mm