تریلر کمپر سه جهتهHUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
تریلر کمپر سه جهته
HUMBAUR
HTK 3000.31 mit Stahlbortwände, E-Pumpe
VB به اضافه مالیات بر ارزش افزوده
€۶٬۱۵۰
سال ساخت
۲۰۲۶
وضعیت
جدید
موقعیت
Nürnberg 

اطلاعات پایه
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۶٬۱۵۰
- موقعیت:
- Hutbergstr. 27, 90475 Nürnberg, Deutschland

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۳٬۰۰۰ کیلوگرم
وزن خالی:
۹۴۰ کیلوگرم
حداکثر وزن بار:
۲٬۰۶۰ کیلوگرم
طول کل:
۴٬۵۵۵ میلیمتر
عرض کل:
۱٬۹۱۰ میلیمتر
ارتفاع کل:
۱٬۲۶۰ میلیمتر
طول فضای بارگیری:
۳٬۱۳۰ میلیمتر
عرض فضای بارگیری:
۱٬۷۴۰ میلیمتر
ارتفاع فضای بارگیری:
۴۰۰ میلیمتر
محورها و چرخها
پیکربندی محور:
۲ محور
سایز تایر:
195/50 R13C
ترمزها
ترمز تریلر:
تریلر ترمزدار
جزئیات پیشنهاد
- شناسه آگهی:
- A23368807
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۱.۰۹.۱۴۰۵
توضیحات
Humbaur three-way tipper with electric pump and Furmann steel sideboards, hot-dip galvanized, 40 cm high, for demanding applications.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Knsdpfx Ako Algdieijd
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Description:
The HTK three-way tipper not only impresses with our usual high quality standards.
It is equipped with a practical hand pump, which you can also easily replace with an electric hydraulic pump if required. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This turns tilting your load into a breeze, rather than a challenge!
Knsdpfx Ako Algdieijd
Technical data:
Trailer type - Two-axle
Construction type - Aluminum
Rear tipper - 45°
Three-way tipper - 45°
Weight - 940 kg
Total weight - 3,000 kg
Payload - 2,060 kg
Internal length - 3,140 mm
Overall length - 4,555 mm
Internal width - 1,750 mm
Overall width - 1,910 mm
Internal height - 400 mm
Overall height - 1,260 mm
Loading height - 745 mm
Tires - 13 inches
Standard equipment: V-drawbar, hot-dip galvanized
Chassis and tipping platform, hot-dip galvanized
Tipping platform made of steel, manufactured in one piece
Humbaur multi-function lighting
Sideboards, reinforced Furmann BW, galvanized
Rear flap, hinged
Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring
Support wheel
Plank shaft as preparation for aluminum planks for easy retrofitting
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2011
۴۲ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 911 9... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است


























