Machining center

HOMAG OPTIMAT BAZ211 VENTURE 20

HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5)
Year of manufacture: 2005
Bwsdpfjzr N H Usx Akaou
Basic structure and drives
• Machine bed: Heavy-duty, stable design with compact linear guides.
• X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation.
• Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm.
• Lubrication: Manual central lubrication for all drives and linear guides.
Main spindle and C axis
• Power: 11 kW in S6 mode (7.5 kW in S1).
• Cooling: Liquid-cooled, vector-controlled asynchronous motor.
• Speed range: Continuously programmable from 0 to 18,000 rpm.
• Tool holder: HSK F63 according to DIN 69893.
• C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support.
Clamping system (Cantilever table)
• Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system.
• Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops.
• Suction cup equipment:
• 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift.
• 2x dual-action vacuum suction cups (125x75 mm).
• Pneumatics: 4 connections with a single-circuit system for mechanical clamps.
Workpiece dimensions
• Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode).
• Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates.
• Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling.
• Minimum thickness: 12 mm for chamfering, 16 mm for radius milling.
Tool changer and accessories
• Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates.
• Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm.
• Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps).
Control system (Power Control PC85)
• Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning).
• Software:
• woodWOP: Graphical interface for CNC programming.
• woodDesign: 3D interface for furniture design.
• woodScout (optional): Graphical diagnostic system.
• Communication: Ethernet card and modem for remote diagnostics.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.