Machining center

HOLZ-HER DYNESTIC 7535

Holz-Her 5-Axis Nesting Machining Center DYNESTIC 7535 LIFT
ATTENTION: The machine is located in Sydney / Australia!

Nesting with lifting table + labeling station + pusher conveyor, including a manual labeling station for small parts.

Machining area: 3700 x 2200 mm.

The milling spindle has a power of 13.0 kW / 18 HP (S6) and accepts tools with a maximum diameter of 350 mm via an HSK interface.
Hsdpfoz Hvy Ijx Abxou

Drilling with 24 spindles, 18 vertical and 6 horizontal. The maximum drilling diameter is 35 mm. For grooving, the drilling head has an integrated sawing unit for a saw blade with a maximum diameter of 125 mm and a maximum width of 4 mm.

18-position tool changer, pneumatically liftable, with a cover to protect the HSK 63F collet, as well as a 1-position pick-up changer for saw blades with a maximum diameter of 350 mm.

Pneumatic stops, which can be recessed into the table, for special machining operations on the nesting table, or also with vacuum suction cups.

1000 m³/h vacuum capacity via VariAir pump (frequency-controlled).
To be able to use the vacuum capacity in a concentrated manner, the table has a 16-zone vacuum system.

Power Label above the lifting table for panels up to X=4200 x Y=2200 mm.
Touch Label Light - extra label printer under the operator screen for labeling small parts.

The pre-installed pusher unit is connected to the extraction system and can clean the panels and the nesting table.

Overhead laser for complex contours (laser color green).

Screen: 21.5'' / 16:9 touch screen
Software: 1x Campus V7 (machine) + 1x Campus V7 (office), including high-speed curve and 5-axis simultaneous milling.

Barcode scanner

Touch Tool - tool length measurement
Cold Gun - tool cooling

Delivery, installation, and training for the machine can be carried out directly by us for an additional charge.

The machine is currently located at our branch in Sydney / Australia.

In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding.

Our general terms and conditions can be found on our website at holzher.de/de/agb.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.