Wood processing center

Holz-Her Dynestic 7532 10.5 automatic m

Used machine

Year of manufacture 2019


Equipment and technical data:

- For classic nesting machining with a spoilboard
- Machine frame of welded construction
with ground and hardened prismatic guides for the moving column, aggregate head and consoles
- Moving column in gantry design
- Rack-and-pinion drive, helically toothed, in the X and Y directions,
ball screws in the Z direction for precise positioning

- Machining dimensions:

- Max. support surface on nesting table:
X = 3100 mm Y = 1560 mm

- Max. travel:
X = 4695 mm Y = 2100 mm Z = 293 mm

- Max. clearance height DYNESTIC table
Z = 100 mm from top of table (without spoilboard)
- Maximum programmable speed
vector speed: 128 m/min
X = 80 m/min Y = 100 m/min Z = 25 m/min
- DYNESTIC table:
- Fixed, continuous machining table with grid layout
- continuous grooves in the X and Y directions
- groove spacing 50 mm
- with 25 metres of sealing cord for clamping the spoilboard
- Vacuum zones: single-circuit vacuum system
- Drilling unit 7877:
- 19 spindles
- drive power: 1.7 kW

- 13 vertical spindles:
- individually selectable
- U-shaped arrangement
- 5+4 in the X and 4 in the Y direction
- 32 mm grid
- max. drill diameter: 35 mm
- total drill length: 70 mm from screw-on end (depending on panel thickness)
- spindle extension stroke: 70 mm
- direction of rotation: clockwise / counter-clockwise alternating
- n(max): 1000 - 4400 rpm infinitely variable
- fitting: M 10 thread - fit 11 mm
- without tool, without holder

- 6 horizontal spindles:
- 2 double drilling spindles in the X direction
- 1 double drilling spindle in the Y direction
- fitting: M 10 thread, fit 11 mm
- total drill length max. 63 mm from screw-on end
- without tool, without holder
- Milling unit 7842:
- power: 12.0 kW (S6)
- n(max) = 1000 - 24000 rpm infinitely variable
- max. power at 12000 rpm to 24000 rpm
- air-cooled
- with HSK-F 63 tool holder
- with right-hand thread nut (for right-rotating tools)
- with collet chuck with HSK shank
- ceramic ball bearings (hybrid bearings)
- tool weight max. 6 kg (incl. holder)
- tools: milling and grinding tools max. Ø 160 mm
- Safety guarding in accordance with CE standard

- Protective fence at the sides and rear
- Vacuum pump: 500 m³/h, dry-running
- Personal safety via light barriers
in the front area of the machine
- Hand-held control unit for remote control of the machine
with the following operating functions:
- start / stop of the machining program
- speed control of the machining cycles
- reset button
- manual feed / rapid traverse for all axes
- EMERGENCY STOP
- CAMPUS V7 CAD/CAM software 1x machine licence consisting of:
- CAMPUS NC-HOPS:
- graphical variant system with WOP and CAD/CAM properties for creating
part variants using macro technology
- CAMPUS MT-Manager
- CAMPUS Workcenter
- CAMPUS DXF interface
- Automatic central lubrication
- Automatic lubrication at defined lubrication intervals
- Additional sealing against dust through overpressure in every guide carriage

- Simultaneous lubrication:
- for all linear guides in the X, Y and Z directions
Pgodpfx Ajzlbrpsamop
- for all ball screws in the Y and Z directions
- for all milling spindle guides
- for tool changer guides (except pick-up tool changer)
- All console guides are not lubricat...