Municipal vehicle / implement carrier

Holder C 250

* 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled

* 2,600 cc displacement

* Permanent all-wheel drive via hydraulic wheel motors on each wheel

Special paint finish
RAL 9010 white
Work package 1
Front lift
including tow hitch CAT II / CAT I
with passive tilt adjustment
Rotating beacon

Stabilizer bar

Hydraulic set, flow divider 1
Flow divider, first circuit adjustable from 0–25 l/min
with line set to the front and rear
Return line to the front and rear

Hydraulic set, flow divider 2
with tandem pump
Flow divider, second circuit with tandem pump
adjustable from 40–60 l/min
line set to the front and rear
return line to the front and rear
leakage oil line to the front and rear

Dcedpfx Aiszd Riuo Den
Hydraulic tilting mechanism for superstructure frame

Hydraulic set 1
consisting of:
- 2 double-acting control valves with floating position
- 4 quick couplings at the front
- 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front
- Small joystick including floating position for front lift

TIRE 31x10.5 R15
Overall outer width 120 cm, narrow,
140 cm wide when mounted

Fender kit, narrow

Multifunction joystick

Flat roof

Cabin mounted in the center

Hydr. tilting mechanism for cabin

Holder flatbed, complete with substructure
Internal dimensions approx. 1250 x 1060 x 400 mm

Flow divider automatic

Rotating beacon, LED

Work light, LED

Red/white warning markings

The following winter attachments can be purchased separately:

Roller spreader
with hydraulic drive RA-C 06/42, 940 mm
tipping flatbed, combined (NEW), for sand, gravel, possibly salt
rear light design as on the vehicle
paint RAL 2011
roller width: approx. 940 mm
spreading width: approx. 1250 mm
weight (empty): approx. 220 kg

Spreading rate regulation
adjustable via rotary knob in the cab
proportional oil flow regulator, complete with cable and plug mounted on the spreader

Semi-automatic, speed-dependent
only applies in conjunction with item 2
deactivation of the roller when the vehicle stops

Cable sets

Control for spreader fill level

Hummel front sweeper
145 cm working width
hydraulic central drive – serial no. 980
Hummel MS-M1450HO front sweeper
front lift CAT 1
central drive hydraulically via 3/4" chain
dirt brush roller
support feet
1 adjustable heavy-duty wheel in the center
horizontal adjustment
hydraulic pivoting
hoses and couplings

Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee.
The sale is made with the exclusion of any guarantee or warranty.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.