Hydraulic 17 T single column press

hidrobrasil 17 Tonnen Einständerpresse

Here are the technical data of the offered machine:
If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs:

Contact us for an individual offer

HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices!


Technical data + information:

Hydraulic 17 T single column press


Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data:

Knsdpfx Adsgrki Sedjd
a) Traversing speed 10 mm/sec. downwards,

b) opening speed up to 25 mm/sec

c) starting pressing speed 10 mm/sec.

d) table size 400x400 mm

e) ram size 200x200 mm, with T grooves and central cylinder clamping

f) Overall size approx. 1150x800x1750 mm

g) oil temperature display on oil tank

h) pressure adjustment from 5 T to 17 T ( adjustable by knob )

i) Hand lever operation with two speeds

j) Machine body powder-coated, or double-painted

k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug

l) assembly, commissioning, instruction against separate calculation


Press design Single column press
Thermally neutral 80 - 120 °C
Number of operating sides 1 side

Forces
Press force max. ( at 250 bar ) 170 kN
Free ripping force max. 10 kN
Pressure build-up time Closed die Steel to steel Max. 2 sec.

Dimensions
Max. Opening width 250 mm
Stroke and min. opening 100 mm
Table height above floor 850 mm
Height above floor (headroom) approx. 2200 mm
Hall height min. 2.500 mm
parallel deviation at 20°C +/- 0,1 mm

Deflection
Determined at max. clamping force with 70% occupancy < = 0.3 mm/m

Weight
Total weight of press without operating materials approx. 1 to

Speeds
Fast closing with 10 mmSec.
Press speed 10 - 0 mmSec
Sound pressure
Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A)

Hydraulics
Number of pressing cylinders 1 pcs.
Operating pressure max. 250 bar
Pressing pressure build-up time . 2 sec.
Pressure accuracy during pressing stroke +/- 5 bar

Main pump
Gear pump approx. 6 L/min
Oil volume approx. HLP 46 MW 100 liters
Ambient temperature max. 40 °C
Oil temperature max. 55 °C
Flow temperature °C


Electrical system
Main supply 400 V AC
Control voltage hydraulic pumps 24
24 V DC V DC
Frequency 50 Hz
Hydraulic connection Main motor 2.2 kW
Total connection Approx. 3 kW

Design
The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively.
Hydraulic unit

The hydraulic system is mounted on the top of the press.

Safety devices

For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version.
Electrical system / control system

The control cabinet with control, power and safety components is located on the right side of the press.

The press is operated by a hand lever control.