Punching machine

Heidelberg Dymatrix 145 CSB

Machine for punching, embossing, waste stripping and blanking
Used machine, overhauled at the QTM Schwalmtal plant

System equipped with high-performance sheet feeder for NON-STOP operation
⦁ For fully automatic punching, creasing and embossing with or without gripper edge
⦁ for stripping the inner waste as well as the side and rear sheet edges
⦁ for stacking the punched and stripped sheets with the attached gripper edges or
the attached gripper edges or
⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks
remaining sheets
⦁ with a patented gripper carriage register system for maximum register accuracy
⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder
and NON-STOP delivery and does not need to be converted even for the smallest blanks.
changeover
even the smallest cuts. (Shuttle table with comb structure)
⦁ Cut-off sheet magazine with electrical stock control, during production
refillable during production
⦁ with Centerline equipment
⦁ with automatic pallet changing device in the storage area
⦁ Modem
⦁ Standard elevation of the machine 600 mm

Specification
Sheet format max. 1060 x 1450 mm
Sheet format min. 500 x 700 mm
Maximum punching force 6.0 MN (600t)
Speed 8,000 Bg / h

Processable materials:
Paper min. 80 g/m²
Cardboard up to 2000 g/
Corrugated cardboard up to 5 mm
(max. sheet curvature 4 %)
Hedpfot E Nthox Ahuji

Features:
patented QTM rail system
manual non-stop feeder
stripping station
depaneling station
Centerline
Fully automatic pallet changing device Deposit
incl. platform
Upgrade of the control system to Siemens S7
Completely overhauled machine drive
Quick-clamping frame in all tool stations

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.