ترکیب الوار قاب مونتاژ ایستگاه

H&M X-Combi

A complete working station for the production of timber frame walls including the following functions

1. Framing of the wall
2. Application of cladding
3. Nailing or stapling of cladding
4. Drilling and Routing of openings and overhangs
5. Application of breather paper
6. Nailing of battens
7. Gluing of sheeting material to frames

Specification

Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software
Heavy duty tables with one fixed side and one moving side
90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished
1500mm minimum panel height Maximum panel height 6m
Maximum panel length 20m
825mm working height 500mm maximum frame height
Motorised table opening with automatic brake locking
Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel
Framing tools driven to the required position via a servo drive motor, with heights controlled by software
Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted
Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor
Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area
Nljdpfxob Tmrve Al Noh
Selection of multiple nail positions in both automatic and manual modes
Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position.
Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.