Double miter saw

GRAF SYNERGY SD 500-S8

The SD 500 industrial double-head saw with a hydropneumatic feed system for the cutting discs is a machine model with cutting discs that extend from below. As standard, the left head is fixed. The right head is mobile and is moved using a highly precise servo drive. The cutting length readout is completely independent of the drive for the mobile head. The machine is equipped with fixed stops for angles of 45º and 90º. Intermediate angles can also be achieved. Both heads are equipped with main vertical and horizontal clamping devices. The discs, set at an angle of 45º inwards, eliminate the need for corrections. Because the cutting discs extend from bottom to top and the main vertical clamping devices act on the profile at the point of its highest stiffness, the profile does not bend in the housing groove. This ensures that both the angles and planes are maintained, with the additional support of the horizontal clamping device. The machine's operation is controlled via an independent control panel equipped with a DELL PC.

Standard equipment:

independent control panel with a PC
cutting length readout independent of the head drives (from a magnetic strip)
electronic positioning of the mobile head
automatic machine zeroing
cutting of 2 to 4 profiles simultaneously
discs extending from below in a / \ arrangement, eliminating the need for corrections
hydropneumatic feed system for the cutting discs
triple vertical and horizontal pneumatic clamping
pneumatic adjustment of the disc extension angle (90°-45°)
spacer between the heads, applied manually
4 outlets for industrial extraction, Ø100mm
cooling system
Fsdoznuk Rspfx Aivegh
cutting length: min 300mm, max 3300mm
roller guide at the mobile head, 3000mm

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.