Parts washer, spray washing machine

Glogar CM 13 - 2 Tank

Parts Cleaning System / Spray Cleaning System Type CM13
2-Tank (Washing + Rinsing) including air knife blow-off

Basket Diameter: 1,300 mm (octagonal)
Max. load capacity: 1,000 kg
Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine.
Useful height: 800 mm
Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar
Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar
Total connected load: approx. 52 kW
Control: Siemens S7-1200 with KTP700 touch panel

Including the following features:
+ automatic water refill for both tanks
+ automatic chemical dosing 1-10% (Dosatron)
+ special spray system (can be optionally activated) for small components (= E-spray system)
+ side channel blower with height-adjustable air knife system (blow-off drying)
+ steam extraction including condensate return
+ weekly timer for electric heating
+ pre-configured for retrofitting an oil separator
Isdpov Tm Ayefx Amtobc
+ media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing)
+ external cladding with stainless steel sheet
+ complete system fully insulated
+ tanks separated into two modules; fully insulated (different temperatures possible)
+ removable filter baskets in the return flow
+ stainless steel circulation pumps incl. mechanical seal and soft starter

The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.