Carcase press

Gannomat Concept 70 ECO

New machine

Year of manufacture: 2025

Features and technical specifications:

Fully equipped in standard version with:

- Robust, torsion-free steel frame, welded and bolted construction
- Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements
- Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints
- Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates
- Continuous pressing surface, height 95 mm, on lower vertical pressure beam
Ijdpfx Agow Nafksbsap
- Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir
- The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW)
- Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control
- Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg)
- Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg)
- Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second
- Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45°
- Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel
- Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams
- Re-pressing function to increase or decrease the pressing force during the pressing process
- Working height/loading height: 300 mm
- Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm

Including surcharge for rapid traverse speed, for fast positioning of the pressure beams,
controlled via automatic workpiece detection with sensors in the pressure beams,
pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec,
the sensors can be deactivated for pressing special components

Including a set of machine feet for 500 mm working height

Location: Flörsheim
Availability: Short-term

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.