Semi-trailer containerchassis

FLIEGL SDS 380 Kippchassis Vario Kipp 20/30

Customized transport solution
Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Chassis, semi-trailer, container
Fine-grained steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions
Front locking on tipping cylinder support with bilateral wedge inserts, rear locking on continuous rotating shaft with return spring
Container attachments:
Locking crossmember, 2-fold for locking 1 x 20 ft or 1 x 30 ft container.
Adjustment via central telescope as interlocking central tube frame
with bolt locking
24 tons, 2-stage support wind, single-sided operation, with straight lower part, without thrust compensation
Free support leg angle or free pivoting radius to the rear approx. 1850 mm
2 chock blocks with holder
Semi-shell fenders
with anti-splash flaps according to EC
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm.
(without hose connection)
Operation hydraulically via truck auxiliary drive
Hydraulic connection with hose and HDK screw plug NW = 48 mm with knurled nut
Axles + suspension
SAF disc brake axles with 430 mm disc diameter
Axle/suspension laser-aligned to reduce tire wear and fuel consumption
Axle spacing offset mm (combined transport) up to 44 tons total weight
Air suspension
Braking system
2-line compressed air braking system
Color-coded line routing for easy servicing.
Spring-loaded parking brake
Tele Control
Axle load adjustment for easy telescoping
2 non-interchangeable coupling heads at the front, without connecting line
EBS, electronic brake system with EBS socket at the front, without connecting cable
Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS!
with lifting and lowering valve
Vehicle - driving stability system
Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab, truck must be suitably prepared, no truck installation.
Wheels and tires
385/65 R22.5, manufacturer's choice
Steel rims, factory silver
Electrical system
24 Volt, multi-chamber lights, yellow LED lighting on the side
2 white position lights at the front
2 white/red side marker lights at the rear
2 x 7-pole non-interchangeable sockets at the front, without connecting cable
Dkodpfji Ri Avox Ahken
additional LED work light at the rear, switched via reversing light
Country of registration/ signs
Germany
Type approval according to EC 2007/46
24/7 service hotline
prepared for single-row license plate holder
Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear
Paint finish
Frame DB 7350 Novagrau
10-year warranty against rust-through
Support legs black coated

Customized transport solution
Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.