4x precision exchange pallets 1250x1250 mm

FIBRO

FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System
Description
Manufacturer: FIBRO GmbH, Rotary Table Division
Type: Precision Changeable Pallet 1,250 × 1,250 mm
Year of Manufacture: 2005
Quantity: 4 pieces

Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system.
The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer.
Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns.
The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line.

Technical Data
- Quantity: 4 pieces
- Dimensions per pallet: 1,250 × 1,250 mm
- Height: approx. 150–160 mm
- Weight: approx. 1,500 kg per pallet
- Total weight of 4 pallets: approx. 6,000 kg
- Pneumatic connection: 1 line per pallet
- Indexing: P1 / P2
- Underside: 2 indexing rings per pallet
- Clamping slots with hardened strips
- Thread/hole patterns including M12, M20 and M30
- Customer-specific hole patterns
- Original drawings or technical FIBRO documents available

According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets.

Factory/Serial Numbers
1817739 / 002
1817739 / 003
1817739 / 004
1817739 / 005

Tsdpfx Aezxz Azeggeb
The pallets have partially different article numbers and different customer-specific hole patterns.

Accessories:
The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts.

Condition:
Used condition from industrial application.
The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application.
A current metrological check of the geometric accuracy has not been carried out.
Sold in the existing condition and scope of delivery as shown in the pictures.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.