Tool grinderEwag
Ewamatic

اطلاعات دستگاه
- نام دستگاه:
- Tool grinder
- تولید کننده:
- Ewag
- مدل:
- Ewamatic
- شماره دستگاه:
- 1800005039
- سال ساخت:
- ۲۰۰۲
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
جزئیات فنی
- مسافت جابجایی محور X:
- ۳۶۰ میلیمتر
- مسافت حرکت محور Y:
- ۲۴۰ میلیمتر
- مسافت حرکت محور Z:
- ۲۴۰ میلیمتر
- مدل کنترلر:
- NUM 1050
- زاویه چرخش محور B (حداکثر):
- ۱۲۰ °
ارائه
- موقعیت:
- Sachsen-Anhalt, آلمان
– فاصله: حدود ۳٬۹۷۰ کیلومتر
- در دسترس بودن:
- بلافاصله پس از پایان حراج
- شرایط تحویل:
- FCA
€۱٬۰۰۰٫۰۰ (الزامی)
رایگان
توضیحات
No minimum price – guaranteed sale to the highest bidder!
The machine is equipped with grinding and erosion functions. The machine was renovated in 2016. The latest service report for the machine is enclosed.
Optionally, a variety of spare parts can also be purchased in addition to the machine.
TECHNICAL DETAILS
Travel range X-axis: 360 mm
Travel range Y-axis: 240 mm
Travel range Z-axis: 240 mm
Tilting axis B: ±120°
Resolution cross axis X: 0.0001 mm
Resolution feed axis Z: 0.0001 mm
Resolution vertical adjustment Y: 0.0001 mm
Resolution tilting axis B: 0.0001°
Rapid traverse cross axis X: 10 m/min
Rapid traverse feed axis Z: 10 m/min
Rapid traverse vertical adjustment Y: 10 m/min
Rapid traverse tilting axis B: 6,500°/min
MACHINE DETAILS
Control: NUM 1050
Connected load without robot: 13 kVA
Compressed air supply: 6 bar
Compressed air connection diameter: 11 mm
Operating hours (according to counter): 4,550 h
EQUIPMENT
Electrostatic filter system
Documentation
Note: The machine has a contamination (oil stain) on the glass dipstick. Therefore, a complete on-site test is not currently possible.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
پرداختها
- هزینههای جانبی خرید:
- ۱۸ %
- شرایط پرداخت:
- ۱۰۰٪ پیشپرداخت
- روشهای پرداخت:
انتقال بانکی
جزئیات پیشنهاد
- شناسه آگهی:
- A22076908
- شماره مرجع:
- AUC-2606074
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۹.۰۳.۱۴۰۵
- پیشنهاد انحصاری:
- فقط در مزایده موجود است
بازدید
Nordrhein-Westfalen EWAGEwamatic
Birmingham RAS62.25
Dietzenbach HAUR60
Velen BERG & SCHMIDVKS 370 VA MPS
Cloppenburg VollmerQWD 760
Freiberg am Neckar KUKAKRC4 Linearachse 1500/3T(2)
آلمان SCHÜTTEAF42
Marchtrenk Roll-o-MaticRPG
Goldenstedt KASTOSBA 260 AU
دانمارک HAASTR160 with Sigma 5
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of ۱۸ % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.

















































































