CNC turning and milling center

EMCO Hyperturn HT 665 MC plus

Control: CNC path control with 10.4" TFT color display
Siemens Sinumerik 840 D powerline

TECHNICAL DATA
Swing diameter
* over bed: 600 mm
* over cross slide: 500 mm
Distance between main and sub spindle: 975 mm
Max. turning diameter: 430 mm
Max. turning length: 744 mm
Max. bar diameter: 65 mm
Max. workpiece size with sub spindle: ø 200 x 200 mm

Main spindle
Drive power: 29 kW
Speed range: 0 – 5000 rpm
Max. bar capacity: 65 mm
Max. chuck size: 200 mm
C-axis *resolution: 0.001°

Sub spindle
Drive power (100/40% ED): 17/22 kW
Speed range: 0 – 7000 rpm
Max. chuck size: 200 mm
Travel (Z-axis): 750 mm
C-axis *resolution: 0.001°

Upper tool turret
Disc turret with directional logic
Number of stations: 12
of which driven: 12
Tool holder DIN 69880 VDI 30
Drive power: 6.7 kW
Speed range: 0 – 4000 rpm
Travel range
* X-axis: 270 mm
* Z-axis: 750 mm
* Y-axis: +50 mm

Lower tool turret
Disc turret with directional logic
Number of stations: 12
of which driven: 12
Tool holder DIN 69880 VDI 30
Drive power: 6.7 kW
Speed range: 0 – 4000 rpm
Travel range
Hfjdoyx U Hijpfx Af Ejf
* X-axis: 205 mm
* Z-axis: 750 mm

EQUIPMENT/ACCESSORIES

- Fully enclosed guard electrically interlocked, with sliding doors and machine light
- IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement
- Thermocompensation systems for integrated spindle motors (liquid cooled)
- Hollow clamping cylinder with draw tube for main spindle
- Solid clamping cylinder with draw bar for sub spindle
- C-axes for main and sub spindle
- Transmit software for easy C-axis programming
- Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity)
- Drive units in upper and lower turret
- Parts ejector and flushing through the sub spindle
- Finished parts pick-off device
Maximum finished part: ø 65 x 200 mm
Maximum finished part weight: 4.5 kg
- Conveyor belt for removing finished parts from the machine
- Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret
Clamping diameter range: 10 – 70 mm
- Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar
- Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant
- Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining
- Electronic oil mist separator 800 – 1000 m³/h
- Automatic central oil lubrication for guideways and ball screws
- Grease lubrication for main and sub spindle
- Foot pedal for actuation of clamping devices
- HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)
- HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets)
- 3-color signal lamp (red, green, white)
- Serial interface
- Mounting elements
- Documentation

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.