CNC turning-milling center

DMG CTX Alpha 500

Description:

The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option).

WORKING AREA (V1–V4):
- Swing over bed: 19.69"
- Swing over cross slide: 11.42"
- Maximum turning diameter: 7.87"
- Distance between centers: 30.71"
- Maximum turning length: 19.69" / 15.82" / 20"
- Max. unsupported workpiece weight: 35 lb
- Max. overhang from spindle face (unsupported): 165"
- Max. workpiece weight between centers: 100 lb
- X-axis travel: 7.48"
- Y-axis travel (option): 3.14" (+/- 1.57")
- Z1-axis travel: (specify)
- Z3-axis travel: (specify)
- Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18")

MAIN SPINDLE:
- Spindle nose (flat type): FL 140h5
- Chuck diameter: 6.69" (optionally 8.26")
- Bar capacity: 2.01"
- Spindle bore: 2.87"
- Guide bush diameter: 2.05"
- Inner diameter of front bearing: 3.94"
- Spindle bearing lubrication: grease
- Max. power (100/40% duty cycle): 20.82 / 36.20 kW
Dodpox Apkzofx Aa Tjki
- Speed range (100% duty cycle): 6000 rpm
- Speed range (40% duty cycle): 6000 rpm
- Rated speed: 1500 rpm
- Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb
- Voltage type, number of ranges: AC/1
- Motor type: ISM52

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.