CNC turning and milling center

DMG MORI NTX 3000 / 1500

We offer you the following:

Manufacturer: DMG MORI
Model: NTX 3000/1500
Year of manufacture: 2023
Control: DMG Mori Celos with Fanuc F31iB5

Technical specifications:
Max. turning diameter: 670 mm
Turning length: 1,519 mm
Bar capacity: max. 102 mm

Travels:
x1-axis: 675 mm
y-axis: +/- 150 mm
z1-axis: 1,562 + 164 mm
b-axis: +/- 120°
a-axis: 1,542 mm
x2-axis: 200 mm
y2-axis: +/- 40 mm
z2-axis: 1,542 mm

Main spindle:
Max. speed: 3,000 rpm
Drive power: 30/25 kW
Torque: 1,194/995 Nm
Spindle nose: JIS A2-8
Spindle bore: Ø 111 mm

Counter spindle:
Max. speed: 4,000 rpm
Drive power: 18.5/18.5/15 kW
Torque: 599/505/409 Nm
Spindle nose: JIS A2-8
Spindle bore: Ø 91 mm

Milling spindle:
Speed range: 0 – 12,000 rpm
Drive power: 28/23 kW
Torque: 132/95.3 Nm
Tool holder: Capto C6
Number of tool stations: 76 positions
Max. tool diameter: Ø 70/Ø 130 mm
Max. tool length: 400 mm
Max. tool weight: 8 kg

Turret:
Number of tool holders: 12 positions
Speed of driven tools: 12,000 rpm
Tool holder: BMT40
Torque: 16.9 Nm
Itedpfx Anoy Sfx Neken

Rapid traverse speeds:
x-axis: 50 m/min
y-axis: 40 m/min
z-axis: 50 m/min
a-axis: 36 m/min
x2-axis: 25 m/min
y2-axis: 18 m/min
z2-axis: 40 m/min
b-axis: 100 rpm

Operating hours: approx. 4,500 h
Spindle hours: approx. 2,200 h

Technical features & accessories:
− Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle
− Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle
− Foot switch for chuck operation
− Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle
− Tailstock function for counter spindle
− Magazine-side control panel for the tool magazine
− Coolant: water-soluble coolant
− Chip conveyor (right discharge)
− Coolant temperature control/coolant chiller
− Coolant spray gun
− Float switch for coolant
− Coolant shower at main and counter spindle chucks
− Compressed air blow-off system for chuck (counter spindle)
− Oil mist separator zeroGOF #2
− Oil separator
− ICS 70 bar, TMF300 band filter system, 980 l tank
− Manual tool presetting device for main and counter spindle
− Direct measuring system in x1, x2, y, z1, z2 axes
− Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600
− Universal filter
− 3D quickSET
− Cycle Alternating Spindle Speed
− Cycle "Tailstock Tip at Turret"
− Cycle MPC – Machine Protection Control
− Cycle MVC – Machine Vibration Control
− Synchronous thread cutting without compensating chuck
− Increased input resolution to 0.0001 mm
− Cs control for tool spindle
− Program restart

Accessories, illustrated tools, and clamping devices are only included if specified in the additional information.
Technical data and details subject to change, errors and prior sale excepted!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.