CNC turning and milling center

DMG Mori NTX 2000/1500 2nd Gen

We offer you the following:

Manufacturer: DMG Mori
Model: NTX 2000/1500 2nd Gen
Year of manufacture: 2020
Control: Celos Fanuc F31iB5, Mapps 4

Technical Data:
Maximum turning diameter: 670 mm
Pedpfx Afeyfl N Tj Uopl
Turning length: 1,538 mm
Bar capacity: max. 65 mm

Travel axes:
X1 axis: 675 mm
Y axis: ±150 mm
Z1 axis: 1,562 + 164 mm
B axis: ±120°
A axis: 1,542 mm
X2 axis: 200 mm
Y2 axis: ±40 mm
Z2 axis: 1,542 mm

Main spindle:
Maximum spindle speed: 5,000 rpm
Drive power: 15/15/11 kW
Torque: 421/302/256 Nm
Spindle nose: JIS A2-6
Spindle bore: Ø 73 mm

Counter spindle:
Maximum spindle speed: 5,000 rpm
Drive power: 15/15/11 kW
Torque: 421/302/256 Nm
Spindle nose: JIS A2-6
Spindle bore: Ø 73 mm

Milling spindle:
Speed range: 0–12,000 rpm
Drive power: 28/23 kW
Tool holder: Capto C6
Number of tool positions: 76
Max. tool diameter: Ø 70/Ø 130 mm
Max. tool length: 400 mm
Max. tool weight: 8 kg

Turret:
No. of tool holders: 12
Speed of driven tools: 12,000 rpm
Square tool shank length: 20 mm
Boring bar shank diameter: Ø 32 mm
Drive power: 5.5/5.5/3.7 kW
Torque: 16.9/13.1/8 Nm

Rapid traverse:
X axis: 50 m/min
Y axis: 40 m/min
Z axis: 50 m/min
A axis: 36 m/min
X2 axis: 25 m/min
Y2 axis: 18 m/min
Z2 axis: 40 m/min
B axis: 100 rpm

Through-bore clamping device: Ø 67 mm
Operating hours: approx. 15,050 h
Spindle hours: approx. 4,210 h

Technical features and accessories:
- Kitagawa 8-inch through-bore chuck BB208A621 Ø 210 mm on main and counter spindle
- Dual foot switch for spindle 1 and spindle 2
- Chuck cylinder stroke monitoring (linear position monitoring) for spindle 1 and spindle 2
- Full indexing of the tool spindle
- Turret tailstock function
- Suitable coolant: water-soluble coolant
- Chip conveyor
- Hydrajet MS30-1000/70 bar coolant system
- Coolant chiller
- Air blast device for chuck (spindle 2)
- Interface for mist extractor
- Manual tool presetting device installed on the machine (removable, spindle 1 and spindle 2)
- Fully closed control loops for X, Y, and Z axes (tool spindle)
- In-machine workpiece measuring system, Renishaw RMP600
- 4-color signal tower
- Multi-dry filter
- Voltage: 380 V, Frequency: 50 Hz
- Alternating spindle speed
- Prepared for 3D quickSET
- Open pocket and island milling
- High-speed fixed cycle
- X-axis direction, JIS/ISO-compliant
- 3D machine model
- Transformer

Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specifically stated in the additional information.
Technical data and specifications are subject to change and errors. Prior sale reserved!

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.