Demag Systec 650/1020-2300 (2014) Servo, Robot Sepro SR SDR5X35 HL S5 TRANS

Demag Systec 650/1020-2300

Clamping force: 650 t

Screw diameter: 60 mm

Injection volume: 891 cm3

Shot weight: 810 g

Distance between tie bars V: 1020 mm

Distance between tie bars H: 1020 mm

Platten dimensions H x V: 1450 x 1470 mm

Max. oppening stroke: 930 mm

Min Mould installation height: 450 mm



Type: Horizontal

Drive: Hydraulic

\+ Cooling water flow controller (2x 6 circuits)

\+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014)



Hot Runners
Nedpfoyzylvox Ankjlg

1. 24-zone integrated hot runner controller (ZE 273)
2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10)
3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276)
4. Hot runner connector upgrade for 24 zones (SO 01)
5. Total: 60 zones across two controllers

Equipment Highlights

Injection

1. Electric screw drive, frequency-controlled (WA 313)
2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12)
3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08)

Quality & Process Monitoring

1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04)
2. Holding pressure switchover with peak value capture and recording (ZE 350)
3. 100% process data recording (PDE) with statistics and graphics (ZE 420)

Mold & Core Pulls

1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237)
2. Electric pressure relief for core pulls (SO 27)
3. Separate pneumatic hot runner needle (SO 04x)

Quick Mold Clamping

1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d)

Connectivity & Automation

1. OPC/UA interface for host systems (SO 5631)
2. WC5 World Connect — remote access and service (ZE 571)
3. Integrated BDE/PDE production data management (ZE 471 + ZE 420)
4. Demag robot interface via CAN bus (ZE 752)

Energy & Infrastructure

1. Integrated energy monitoring with per-part cost calculation (ZE 4921)
2. Elastic machine mounting / vibration isolation (WA 180)



\+ 2x Magnetic platten