Injection molding machineDEMAG
IntElect2 350/830-2200
Injection molding machine
DEMAG
IntElect2 350/830-2200
سال ساخت
۲۰۲۲
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Wembley 

اطلاعات پایه
- نام دستگاه:
- Injection molding machine
- تولید کننده:
- DEMAG
- شماره دستگاه:
- IntElect2 350/830-2200
- سال ساخت:
- ۲۰۲۲
- وضعیت:
- تقریباً نو (استفادهشده)
- قابلیت عملکرد:
- کاملاً عملیاتی
- ساعات کارکرد:
- ۱۴٬۵۰۰ h
قیمت و مکان
- موقعیت:
- 12 Hallmark Centre, HA9 0LB London, United Kingdom

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۲۱٬۰۰۰ کیلوگرم
جزئیات قدرت
ولتاژ ورودی:
۴۰۰ V
فرکانس ورودی:
۵۰ هرتز
مستندسازی و گواهینامه
مستندات / راهنما
جزئیات بیشتر
نیروی گیرهگیری:
۳۵۰ کیلو نیوتن
فاصله بین ستونها:
۸۳۰ میلیمتر
نیروی اجکتور:
۶۰ N
ضربهٔ اجکتور:
۲۵۰ میلیمتر
فشار تزریق:
۲٬۴۲۶ میله
وزن تزریق:
۸۲۰ g
حداقل ارتفاع قالب:
۴۰۰ میلیمتر
قطر پیچ:
۶۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A23369110
- شماره مرجع:
- PM175
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۲.۰۹.۱۴۰۵
توضیحات
Sumitomo Demag IntElect2 350/830-2200 – 2022 – 15,000 Hours .
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year of manufacture: 2022
Machine type: All-electric injection moulding machine
Condition: Very good, available for inspection under power by appointment
Operating hours: Approximately 15,000 hours
Machine description
For sale is a 2022 Sumitomo Demag IntElect2 350/830-2200 all-electric injection moulding machine.
This modern, high-performance injection moulding machine is in very good working condition and remains in production. It has only approximately 15,000 operating hours .
The IntElect2 series is known for its precision, energy efficiency, repeatability and high-performance electric drive technology.
With a 350-tonne clamping force and 60 mm screw, this machine is suitable for a wide range of demanding plastic injection moulding applications.
The machine is available for inspection and demonstration under power by appointment
No robot included.
Technical specifications
General
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year: 2022
Lajde Algp Aopfx Akioi
Clamping force: 3,500 kN / 350 tonnes
Operating hours: Approximately 15,000
Drive system: All-electric
Condition: Available for inspection under power by appointment
Clamping unit
Maximum mould opening stroke: 725 mm
Tie-bar spacing: 830 × 830 mm
Maximum mould weight: 6,600 kg
Injection unit
Injection unit: 2200
Screw diameter: 60 mm
Maximum injection volume: 891 cm³
Maximum injection speed: 160 mm/s
Maximum injection pressure: 2,426 bar
Ejector
Ejector stroke: 250 mm
Standard ejector force: 60 kN
Additional information
Located in the UK
Low operating hours for its age
No robot included
Available for inspection under power by appointment
Sale information
A fantastic opportunity to purchase a modern 2022 Sumitomo Demag all-electric injection moulding machine with relatively low operating hours.
Further photographs, technical information and inspection appointments available on request.
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year of manufacture: 2022
Machine type: All-electric injection moulding machine
Condition: Very good, available for inspection under power by appointment
Operating hours: Approximately 15,000 hours
Machine description
For sale is a 2022 Sumitomo Demag IntElect2 350/830-2200 all-electric injection moulding machine.
This modern, high-performance injection moulding machine is in very good working condition and remains in production. It has only approximately 15,000 operating hours .
The IntElect2 series is known for its precision, energy efficiency, repeatability and high-performance electric drive technology.
With a 350-tonne clamping force and 60 mm screw, this machine is suitable for a wide range of demanding plastic injection moulding applications.
The machine is available for inspection and demonstration under power by appointment
No robot included.
Technical specifications
General
Manufacturer: Sumitomo Demag
Model: IntElect2 350/830-2200
Year: 2022
Lajde Algp Aopfx Akioi
Clamping force: 3,500 kN / 350 tonnes
Operating hours: Approximately 15,000
Drive system: All-electric
Condition: Available for inspection under power by appointment
Clamping unit
Maximum mould opening stroke: 725 mm
Tie-bar spacing: 830 × 830 mm
Maximum mould weight: 6,600 kg
Injection unit
Injection unit: 2200
Screw diameter: 60 mm
Maximum injection volume: 891 cm³
Maximum injection speed: 160 mm/s
Maximum injection pressure: 2,426 bar
Ejector
Ejector stroke: 250 mm
Standard ejector force: 60 kN
Additional information
Located in the UK
Low operating hours for its age
No robot included
Available for inspection under power by appointment
Sale information
A fantastic opportunity to purchase a modern 2022 Sumitomo Demag all-electric injection moulding machine with relatively low operating hours.
Further photographs, technical information and inspection appointments available on request.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2025
۲ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+44 7989 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Kreuztal
۴٬۲۳۰ km
Sumitomo (SHI) DemagIntElect 2 350/830-2200 mit Roboter-Sys
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است


































