TCM

DEK Printing Machines Bofa International

Air Delivery System: Re-circulating
Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C
Temperature control: +/- 0.5°C
Cooling Capacity: 2000W
Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C)
Air In Filter: G4 (91% Average Arrestance) EN 779: 2002
Refrigerant Gas: R134a 0.75Kg
Full load current: 12.6A
Start Up Current: 20A
Frequency: 50 / 60Hz
Voltage: 230V +/- 10% (207V – 253V working range) Single Phase
Acoustic Noise: > 75dB
Dimensions: 1300mm High (+ beacon), 510mm, 540mm
Condensate: Collected in 5 litre container for disposal or piped to drain
Weight: 100Kg
Documentation not included
the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers.
The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient.
Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life.
Nwodpshg Rcxsfx Ahusc
Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems.
The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open.
To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control.
To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates.
The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators.
Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow.

Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania
Irrtum, Anderungen und Zwischenverkauf vorbehalten /