Semi-automatic crosscut sawCURSAL
TRV 400
Semi-automatic crosscut saw
CURSAL
TRV 400
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۴٬۷۰۰
سال ساخت
۱۹۹۷
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Roding 

اطلاعات پایه
- نام دستگاه:
- Semi-automatic crosscut saw
- تولید کننده:
- CURSAL
- مدل:
- TRV 400
- شماره دستگاه:
- 972712
- سال ساخت:
- ۱۹۹۷
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۴٬۷۰۰
- موقعیت:
- Roding, آلمان

تماس بگیرید
جزئیات فنی
ابعاد و وزن
وزن کل:
۶۰۰ کیلوگرم
طول کل:
۴٬۶۰۰ میلیمتر
ارتفاع کل:
۹۰۰ میلیمتر
جزئیات قدرت
ولتاژ ورودی:
۳۸۰ V
جزئیات بیشتر
قدرت:
۳٫۷ کیلووات (۵٫۰۳ اسب بخار)
حداکثر ارتفاع برش:
۱۰۰ میلیمتر
حداکثر عرض برش:
۲۲۰ میلیمتر
قطر نازل استخراج:
۱۲۰ میلیمتر
قطر تیغ اره:
۴۰۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A23315865
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۲.۰۸.۱۴۰۵
توضیحات
Offering a manually operated chop saw, model TRV 400, manufactured by "CURSAL".
The maximum chop cross-section is 100 x 220 mm. The machine is equipped with a two-hand control and easily adjustable pneumatic stops.
1. The saw system consists of a 2-meter powered roller conveyor (from the right) with a 0.35 kW motor.
Iiedpfx As Aivp Heizoi
2. The semi-automatic chop saw has a simple two-hand release and must be operated manually.
The saw blade diameter is 400 mm. Possible wood cross-section up to 120 x 220 mm (maximum cross-section of the cut: 14,000 mm2).
Compressed air connection: 6-10 atm. Electrical drive power: 3 kW.
3. A carpet conveyor running to the left for chop pieces and offcuts, with a 0.35 kW motor.
With this system, softwood cant pieces of 85 x 85 mm were cut into short pencil blanks.
The system is in very good condition and has only been used rarely since 2002.
Inspection is possible at any time.
The system is offered and sold in its current condition. No guarantees, warranties, or return promises.
Original technical documentation is available.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The maximum chop cross-section is 100 x 220 mm. The machine is equipped with a two-hand control and easily adjustable pneumatic stops.
1. The saw system consists of a 2-meter powered roller conveyor (from the right) with a 0.35 kW motor.
Iiedpfx As Aivp Heizoi
2. The semi-automatic chop saw has a simple two-hand release and must be operated manually.
The saw blade diameter is 400 mm. Possible wood cross-section up to 120 x 220 mm (maximum cross-section of the cut: 14,000 mm2).
Compressed air connection: 6-10 atm. Electrical drive power: 3 kW.
3. A carpet conveyor running to the left for chop pieces and offcuts, with a 0.35 kW motor.
With this system, softwood cant pieces of 85 x 85 mm were cut into short pencil blanks.
The system is in very good condition and has only been used rarely since 2002.
Inspection is possible at any time.
The system is offered and sold in its current condition. No guarantees, warranties, or return promises.
Original technical documentation is available.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین بار آنلاین: هفته گذشته
ثبت شده از: 2015
۵ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+49 9461 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Izdebnik
۳٬۳۹۷ km
CURSALTRV S400
موفق
پیام شما ارسال شد.
آگهی کوچک
Marano Vicentino
۳٬۸۸۵ km
CURSALTRV 400
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است






























