Thermoforming Machine

COMI SL2000 x 900 x 550mm

COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995)

TECHNICAL DATA OF THE EQUIPMENT

Max. frame inner size mm 2005 x 905

Scrap cutter motor power kW 3

Max. tool base size mm 2000 x 900

Crjdsz I Sbdopfx Ai Doh
Scrap conveyor motor power kW 0.37

Min. tool base size mm 700 x 500

Finished workpiece discharge belt motor power kW 0.75

Max. sheet size mm 2090 x 960

Cross-cutting motor power kW 0.25

Min. sheet size mm 790 x 560

Cross-cut scrap conveyor motor power kW 0.22

Max. tool height mm 800 (550+250)

Transfer unit motor power kW 1.5

Maximum formed workpiece height mm 550

Auxiliary units max. consumption kW 5.10

Max. sheet stack height mm 1000

Max. installed power kW 375

Max. pallet height mm 180

Tempering unit power kW 52

Upper heating power kW 83.3

Power consumption at 70% load kW 262.5

Lower heating power kW 71.3

Vacuum pumps capacity m3/h 750 (250x3)

Upper preheating power kW 52

Tool vacuum tank capacity L 2000

Lower preheating power kW 46.8

Bell vacuum tank capacity L 2000

Oil pump motor power kW 19 (15+4)

Required oil quantity L 600

Vacuum pump motor power kW 23.4 (7.8x3)

Required air pressure kPa 600

Sheet centering motors power kW 0.24 (0.12+0.12)

Incoming water pressure kPa 200-300

Sheet feed motor power kW 2.2

Max. hydraulic operating pressure MPa 18

Sheet feed width-adjustment motor power kW 2.2

Hydraulic operating pressure MPa 10

Sheet picker motor power kW 0.37

Incoming water temperature °C 12-20

Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.