Recycling extruderNext Generation Recyclingmaschinen GmbH
F:Gran 145-20
Recycling extruder
Next Generation Recyclingmaschinen GmbH
F:Gran 145-20
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۹۹٬۰۰۰
سال ساخت
۲۰۱۳
وضعیت
کارکرده
(قابلیت عملکرد محدود)
موقعیت
Bergen op Zoom 

اطلاعات دستگاه
- نام دستگاه:
- Recycling extruder
- تولید کننده:
- Next Generation Recyclingmaschinen GmbH
- مدل:
- F:Gran 145-20
- شماره دستگاه:
- 12090
- سال ساخت:
- ۲۰۱۳
- وضعیت:
- نیازمند تعمیر (کارکرده)
- قابلیت عملکرد:
- قابلیت عملکرد محدود
- ساعات کارکرد:
- ۷٬۷۰۰ h
قیمت و مکان
EXW قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۹۹٬۰۰۰
- موقعیت:
- Bergen op Zoom, هلند

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A22402837
- شماره مرجع:
- Z032
- بهروزرسانی:
- آخرین بهروزرسانی در ۰۵.۰۶.۱۴۰۵
توضیحات
This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago.
Psdpfx Aloznz Ezegegr
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Psdpfx Aloznz Ezegegr
Installed power approx.: 474 kW
Cooling water requirement approx.: 190 l/min
Fresh water consumption approx.: 110 l/h
Feeding system:
• Diameter of the feeding screw: 200 mm
• Drive for the feeding screw: 45 kW, frequency-controlled
• Hopper capacity net 7 m³/250 ft³,
• Gear motor 3 × 3 kW
• 2 sight glasses in the hopper
• 2 level indicators
Extruder:
• Diameter of the extruder screw: 145 mm
• L/D ratio: 24
• Heating power: 50 kW
• Extruder drive unit 280 kW
Vacuum 1:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 11 kW
• Vacuum capacity: 225 m³/h
• Vacuum pressure: 33 mbar
Vacuum 2:
• Screw length: 16 L/D
• Heating power: 40 kW
• Vacuum pump power: 7.5 kW
• Vacuum capacity: 190 m³/h
• Vacuum pressure: 33 mbar
Cylinder:
• Cylinder: Bimetal extruder cylinder,
• Reinforcement layer 1.8–2.0 mm thick,
• Hardness 63–65 HRC
Installation conditions:
• Voltage: 3 × 400 Volts
• Permissible fluctuation max.: +5 % – 5 %
• Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 %
• Protective measure: Multiple grounding
• Ambient temperature: min. 15 °C, max. 35 °C
• Humidity max.: 90 %
• Altitude of the installation site: 0 – 1000 m
The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe.
The details for optimal transport need to be clarified. The machine price is without packaging.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2026
۱۵ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+43 660 2... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک
Premnitz
۳٬۹۸۴ km
BARMAGKEP 200-26,3,3-S
آگهی کوچک
Piera
۴٬۶۵۷ km
SPR
آگهی کوچک
Osterholz-Scharmbeck
۴٬۲۴۱ km
ZERMAGSC 500/1000-5-3
آگهی کوچک
Manchester
۴٬۹۶۲ km
ROTAJETFloat Sink tank
آگهی کوچک
آلمان
۴٬۰۶۹ km
Cincinnati ExtrusionARGOS 114P-76-20-1150-UL
آگهی کوچک
Saasveld
۴٬۳۴۳ km
AMA recycling technologies
آگهی کوچک
Ozorzyce
۳٬۶۲۱ km
VecoplanV ECO 1700
آگهی کوچک
Waidhofen an der Ybbs
۳٬۶۸۲ km
BLUELINEEDDY CENTRIC
آگهی کوچک
Konya
۲٬۰۱۵ km
SALUR HİDROLİK MAKİNESLR
آگهی کوچک
Malıköy Başkent OSB
۲٬۰۷۷ km
BASECS-EC-1000-12-VF
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است
































































































































