Drilling centerCMA
3RD
Drilling center
CMA
3RD
سال ساخت
۲۰۲۴
وضعیت
جدید
موقعیت
Dinkelsbühl 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
- Heininger Str. 37, 91550 Dinkelsbühl, Deutschland
تماس بگیرید
جزئیات فنی
- مسافت حرکت محور Y:
- ۶۰۰ میلیمتر
- مسافت حرکت محور Z:
- ۴۵۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A14735488
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۰.۱۱.۱۴۰۳
توضیحات
- Simple graphic programming, including GoTo function in manual mode
- Machining lengths from 3000 - 16500mm, depending on version
- Free programming in DIN/ISO (G commands)
- 2-axis interpolation for X/Y-axis, including arcs
- 3-axis linear interpolation (X/Y/Z)
- 3-axis interpolation (X/Y/Z) for helical milling and thread milling
- Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min.
Main spindle BT 40
- 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212)
- Suitable for both high axial and radial loads = drilling and milling
- Maximum tool length : 290 mm
- Maximum tool diameter : 88 mm
Guide X-axis
- 2 pieces 45 mm linear guides with 2 full ball bearing carriages each
X-axis drive
- helical precision rack, travel 3,000 to 16,500 mm
Itedpfx Acsrb Afasyjn
Y-axis guide
- 2 35 mm linear guides, each with 2 fully spherical carriages
Y-axis drive
- Ball screw diameter 25 mm, travel 600 mm
Z-axis guide
- 2 35 mm linear guides, each with 2 fully spherical carriages
Z-axis drive
- Ball screw diameter 32 mm, travel 450 mm
Standard version
Automatic tool changer with 10 positions, mounted in the machine column
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
- Machining lengths from 3000 - 16500mm, depending on version
- Free programming in DIN/ISO (G commands)
- 2-axis interpolation for X/Y-axis, including arcs
- 3-axis linear interpolation (X/Y/Z)
- 3-axis interpolation (X/Y/Z) for helical milling and thread milling
- Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min.
Main spindle BT 40
- 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212)
- Suitable for both high axial and radial loads = drilling and milling
- Maximum tool length : 290 mm
- Maximum tool diameter : 88 mm
Guide X-axis
- 2 pieces 45 mm linear guides with 2 full ball bearing carriages each
X-axis drive
- helical precision rack, travel 3,000 to 16,500 mm
Itedpfx Acsrb Afasyjn
Y-axis guide
- 2 35 mm linear guides, each with 2 fully spherical carriages
Y-axis drive
- Ball screw diameter 25 mm, travel 600 mm
Z-axis guide
- 2 35 mm linear guides, each with 2 fully spherical carriages
Z-axis drive
- Ball screw diameter 32 mm, travel 450 mm
Standard version
Automatic tool changer with 10 positions, mounted in the machine column
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2009
ارسال درخواست
تلفن & فکس
+49 9851 ... آگهیها
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است