Punching and nibbling machineCIMSA
LMTC/125
Punching and nibbling machine
CIMSA
LMTC/125
FCA VB به اضافه مالیات بر ارزش افزوده
€۹۴٬۹۰۰
سال ساخت
۲۰۰۷
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Sandersdorf-Brehna 

اطلاعات پایه
- نام دستگاه:
- Punching and nibbling machine
- تولید کننده:
- CIMSA
- مدل:
- LMTC/125
- سال ساخت:
- ۲۰۰۷
- وضعیت:
- کارکرده
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
FCA VB به اضافه مالیات بر ارزش افزوده
€۹۴٬۹۰۰
- موقعیت:
- Sandersdorf-Brehna, آلمان

تماس بگیرید
جزئیات فنی
ابعاد و وزن
طول کل:
۲۲٬۵۰۰ میلیمتر
ارتفاع کل:
۴٬۵۰۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A23363245
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۹.۰۸.۱۴۰۵
توضیحات
Colgar CIMSA LMTC/125 punching machine from 2007.
The machine has been used very rarely, has few operating hours, and is in perfect condition.
The machine has 7 coil holders and 46 tool holders.
Technical data:
Ijbo Aku Sbsn E Afdrotp
Number of coil holders: 7
Number of tool holders: 46
Max. coil width / strip width: 1,300 mm
Kedpfxs Ak Uzqs Akiodw
Material thickness: min. 0.8 mm to max. 3.0 mm
Material: sheet metal with a tensile strength of 52 kg/mm
Compressed air working pressure: 6 bar
Data of the coil holders:
Spool 1–4: max. load capacity 7,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,200 mm.
Spool 5: max. load capacity 5,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,500 mm.
Spool 6–7: max. load capacity 5,000 kg, max. strip width 600 mm, max. coil outer diameter 1,500 mm.
Diameter of the coil gripping spindle for all spools: 470/530 mm.
For all spools:
Minimum material thickness of 0.8 mm
Maximum material thickness of 3.0 mm apply.
Self-collection, assistance with dismantling possible.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
The machine has been used very rarely, has few operating hours, and is in perfect condition.
The machine has 7 coil holders and 46 tool holders.
Technical data:
Ijbo Aku Sbsn E Afdrotp
Number of coil holders: 7
Number of tool holders: 46
Max. coil width / strip width: 1,300 mm
Kedpfxs Ak Uzqs Akiodw
Material thickness: min. 0.8 mm to max. 3.0 mm
Material: sheet metal with a tensile strength of 52 kg/mm
Compressed air working pressure: 6 bar
Data of the coil holders:
Spool 1–4: max. load capacity 7,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,200 mm.
Spool 5: max. load capacity 5,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,500 mm.
Spool 6–7: max. load capacity 5,000 kg, max. strip width 600 mm, max. coil outer diameter 1,500 mm.
Diameter of the coil gripping spindle for all spools: 470/530 mm.
For all spools:
Minimum material thickness of 0.8 mm
Maximum material thickness of 3.0 mm apply.
Self-collection, assistance with dismantling possible.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
آخرین حضور آنلاین: دیروز
ثبت شده از: 2022
۱ آگهی آنلاین
ارسال درخواست
تلفن & فکس
+49 9665 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Werdau
۳٬۹۲۴ km
CIMSALMTC/125
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است















