Machining center

BIESSE Rover C 9.50

Working range
X = 4,600 mm
Y = 1,535 mm
Z = 275 mm

Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces.

• Central lubrication system
• Desktop PC
o Intel Celeron D CPU 2.66 GHz or higher
o 512 MB RAM
o 40 GB hard drive
o 15" LCD monitor
o Keyboard
o Mouse
o CD-ROM drive
o Parallel port
o RS-232 serial port
o USB port
o Ethernet card for connection to the office network
• Remote service
o Direct modem access for remote diagnostics and service
• Electrical control cabinet
• Air conditioning for the electrical cabinet
• Safety system
o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation.
• Signal lights for alternating (pendulum) machine operation
• Job recovery function
o Allows machining to resume after an emergency stop.
• CE safety protection systems

Worktable and accessories
• Multizone table for 10 beams and 40 vacuum pods
o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity.
o Vacuum clamping system
o Pneumatic clamping system
• 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm
• EPS electronically positioned table for 10 beams
• Rear stop row for 10 beams with 115 mm travel
• Additional stop row at 375 mm with 140 mm travel
• Additional stop row at 770 mm with 140 mm travel
• Front stop row at 1,175 mm with 140 mm travel
• 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware
• 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware
• Position sensors for all stops
• 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules
• Vacuum unit 132 × 146 × H74 mm
• Vacuum unit 132 × 75 × H74 mm
• Vacuum unit 132 × 54 × H74 mm
• UNICLAMP workpiece clamping system
Gbodpfx Ahozlz Svonow
• Window manufacturing kit H = 74 mm, 40–98 mm
• 6 UNICLAMP double-acting quick-connect clamps
• 2 UNICLAMP modules for short workpieces
• Chip and waste conveyor
• Vacuum generator for 250 m³/h vacuum pump
o 250 m³/h vacuum pump
• Spindle and machining equipment
• Motor power:
o 12 kW at 12,000 rpm (S1 duty)
o 15 kW at 12,000 rpm (S6 duty)
• Maximum spindle speed: 22,000 rpm
• Tool interface: HSK F63
• C-axis: continuous 360°
• B-axis: ±100°
• Coolant unit with 1,600 W cooling capacity
• 15-position tool magazine for the 5-axis head
• Additional Z carriage for rear units
• 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds
• Gear-driven C-axis rotating unit (360°)
• BH9 drilling unit
o 9 independently controlled drill spindles
o Includes:
o 5 vertical drills with 32 mm spacing
o 2 independent dual-output horizontal drills
o Separate 3 kW drive motor
• 22-position tool magazine with 180 mm centre distance
• Automatic lubrication system

Two Leitz tool sets are available for EUR 18,100 + VAT:
• LEITZ IV 68 tool set
• LEITZ IV 90 tool set

This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.