Machining center

BIESSE Rover 24 FT

Biesse Rover ROVER 24 FT CNC machining centre

Description
The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked.
Blodpezqtztofx Afhok
The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting.
The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides.
• The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm )
• The speed on the X-axis is programmable between 0 and 100 m/min.
• The speed on the Y-axis is programmable between 0 and 100 m/min.
• The speed on the Z axis is programmable between 0 and 15 m/min.
• The three axes are driven by brushless digital DC servo motors.
CNC numerical control type NC-500
Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm
10-position tool changer that moves with the unit
Drilling unit with fourteen independent drill spindles
Groove saw
Static frequency converter
Centralized pneumatic system
Centralized lubrication system
Vacuum pump with a capacity of 250 m3/hour
Two push-button control panels
Working pressure for air 6 kg/cm2.
Voltage 380 Volt, 50 Hz.
Safety mats on the front.
CE


(Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales).
(Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf).

Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher

Best woodworkingmachines from the Netherlands Holland
Die besten holzbearbeitungsmaschinen aus die Niederlande
De beste gebruikte machines uit Nederland