Wide belt sanderBütfering
SKO 113 C
Wide belt sander
Bütfering
SKO 113 C
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲۵٬۹۰۰
سال ساخت
۲۰۰۸
وضعیت
کارکرده
موقعیت
Langenfeld (Rheinland) 

اطلاعات پایه
- نام دستگاه:
- Wide belt sander
- تولید کننده:
- Bütfering
- مدل:
- SKO 113 C
- سال ساخت:
- ۲۰۰۸
- وضعیت:
- بسیار خوب (کارکرده)
- ساعات کارکرد:
- ۲۸۲ h
قیمت و مکان
قیمت ثابت به اضافه مالیات بر ارزش افزوده
€۲۵٬۹۰۰
- موقعیت:
- Herzogstrasse 10a, 40764 Langenfeld, Deutschland

تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A22463822
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۷.۰۸.۱۴۰۵
توضیحات
Calibration and fine finishing machine, wide belt sanding machine with electronic segmented sanding shoe and finishing sanding.
Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of lacquered surfaces.
Edge banding machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off.
Segment width of the pressure beam: 35mm.
Contact roller pneumatically adjustable, low wear due to ribbed steel roller.
Grain size compensation.
Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s.
Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min.
Pneumatic workpiece-controlled belt blowing device.
Cleaning brush at the outlet.
Constant working height 900mm by adjusting the upper part of the machine, thus also integrable in sanding lines.
Feed belt still has good grip and is in very good condition.
Maximum sanding width approx. 1340mm.
Workpiece height approx. 3 to 150mm.
Common sanding belt dimension 1360 x 1900mm.
3 rubber-coated pressure rollers.
Infeed roller table and foldable outfeed table.
Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system.
Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm.
Terminal control with 50 programmable sanding programs for automated machine control.
Parameters: Belt speed, feed speed, workpiece height, pressure beam insertion points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller.
CE marking.
Operating manual.
Without the illustrated connection cable.
Original paint, only touched up in places.
Knedpfszqvmrjx Akied
Approx. 282 operating hours, i.e. approx. 20 minutes per week.
Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg.
The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of lacquered surfaces.
Edge banding machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off.
Segment width of the pressure beam: 35mm.
Contact roller pneumatically adjustable, low wear due to ribbed steel roller.
Grain size compensation.
Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s.
Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min.
Pneumatic workpiece-controlled belt blowing device.
Cleaning brush at the outlet.
Constant working height 900mm by adjusting the upper part of the machine, thus also integrable in sanding lines.
Feed belt still has good grip and is in very good condition.
Maximum sanding width approx. 1340mm.
Workpiece height approx. 3 to 150mm.
Common sanding belt dimension 1360 x 1900mm.
3 rubber-coated pressure rollers.
Infeed roller table and foldable outfeed table.
Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system.
Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm.
Terminal control with 50 programmable sanding programs for automated machine control.
Parameters: Belt speed, feed speed, workpiece height, pressure beam insertion points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller.
CE marking.
Operating manual.
Without the illustrated connection cable.
Original paint, only touched up in places.
Knedpfszqvmrjx Akied
Approx. 282 operating hours, i.e. approx. 20 minutes per week.
Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg.
The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
ارسال درخواست
تلفن & فکس
+49 2173 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Teisendorf
۳٬۸۲۳ km
HeesemannHSM.3
موفق
پیام شما ارسال شد.
آگهی کوچک
Jonschwil
۴٬۰۹۰ km
VON ARXHSD 4.2000
موفق
پیام شما ارسال شد.
آگهی کوچک
Bad Oeynhausen
۴٬۲۰۷ km
HEESEMANNEH52.13 Lw/Lk Bw
موفق
پیام شما ارسال شد.
آگهی کوچک
Nattheim
۴٬۰۲۶ km
MartinT 25
موفق
پیام شما ارسال شد.
آگهی کوچک
Bad Honnef
۴٬۲۷۱ km
Format4Finish 1302
موفق
پیام شما ارسال شد.
آگهی کوچک
Kruševac
۳٬۰۷۳ km
ProfiFeed TechnologiesProfiStop Lazer (Optimiser Software)
موفق
پیام شما ارسال شد.
آگهی کوچک
Spatenhof
۳٬۶۱۳ km
KündigBrilliant 1 1100 Cd-Lack
موفق
پیام شما ارسال شد.
آگهی کوچک
آلمان
۴٬۲۱۹ km
FORMAT4Finish 1302
موفق
پیام شما ارسال شد.
آگهی کوچک
Barntrup
۴٬۱۷۸ km
VietS3 223 TM
موفق
پیام شما ارسال شد.
آگهی کوچک
Tauberbischofsheim
۴٬۰۸۷ km
BütferingSWT 124 RC
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است































































































































