Mobile Wrapping Palettwrapper

ATLANTA NEOS Knick ARM 200% PreStretch

Exhibition unit
ATLANTA NEOS stretch wrapper with articulated arm
99 individually storable programs
Start/stop at the same position (corner counter)
Wrapping height 2000 mm
Mast height approx. 1500 mm (fits through almost any door and in almost any van)
Powerstretch PRS 200% film (more available as an option)
Motorized pre-stretch system with stepless adjustment
Electronically controlled film tension via control unit
IEF quick-loading system for easy film roll changes
Bwsdsz Iq Trspfx Akaou
Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm
Automatic film cutting unit (available as an option)
Film tension storable in 4 steps

TECHNICAL DETAILS:
Two maintenance-free 12 V – 100 Ah AGM batteries connected in series
Minimum 160 pallets per Charging – Charging time: 8-10 hours
High-frequency battery charger with LED display
Wrapping height “Machine with MAST (pallet included) 2,150 mm
Height measurement via light sensor or dimension input on the display
Protective bar for emergency stop of the drive
Emergency stop switch compliant with CE regulations
Acoustic warning signal and warning light at machine start
Fall protection for the film carriage
Push buttons for start & stop
Machine function compliant with CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON THE CONTROL PANEL:

All function parameters adjustable via display
- Display lock for program changes
- Adjustable machine speed around the pallet up to 80 m/min
Upward and downward carriage speeds independently adjustable
- Upward carriage speed from 1.3 to 5.4 m/min
- Downward carriage speed from 1.3 to 5.4 m/min
- Number of wraps at the pallet base (1-10 wraps)

- Number of wraps at the pallet head (1-10 wraps)

- Pallet wrapping height adjustment

- Film application tension for foot and head wrapping / ascending and descending, independently adjustable

- Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable

- Ergonomic height for film changes

ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL:

99 storable wrapping programs for the NEOS arm

- Cross wrapping (upward/downward)

- Simple wrapping (upward only or downward only)

- Wrapping cycle with preset start and stop height

- Wrapping to a preset height (with the height sensor deactivated)

- Wrapping cycle for large pallets

- Wrapping cycle for top sheet film

- Soft start cycle for applying edge protection

- Wrapping cycle with reinforcement and adjustable number of wraps

Soft start to reduce film tears on sharp edges Pallet edge wrapping
Wrapping cycle with manual or motorized cord formation (optional)

Further systems available immediately from our Ludwigsburg warehouse
Also available with the ARYA system – automatic film application possible