Rotating arm wrapper Pallet wrapper

ATLANTA LYBRA Easy

LYBRA EASY / 3 programs

Bodpfx Aoykudkjkaedh
TECHNICAL DETAILS
Diameter Ø 1,700 mm
Height 2200mm
Max. pallet dimensions: 1,200 x 1,200 mm
Rotation arm using high resistance ball bearings
Height query by light button
Frequency-controlled turntable drive (soft start - start/stop)
Frequency controlled carriage speed up/down
Signal tone at the start of wrapping and stop at the end of the cycle
Emergency stop switch according to CE regulations
A positioning aid for correctly placing the pallet is included in the scope of delivery
Safety bumper for collision protection
Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm

ADJUSTABLE PARAMETERS ON THE CONTROL PANEL
All function parameters can be set via the display
F02 - Infinitely variable turntable speed 5-12 rpm
Lifting carriage speed can be adjusted up and down independently of each other
F03 - lifting carriage speed up from 1.3 up to 5.4 m/min
F04 - carriage speed down from 1.3 to 5.4 m/min
F05 - Number of wraps on the pallet foot (1 - 10 wraps)
F06 - number of wraps on the pallet head (1 - 10 wraps)
F09 - Winding height photocell delay
F62 - Ergonomic height for film change

ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL
3 storable wrapping programs
F01 - 1 - cross winding (up/down)
F01 - 2 - Single wrap (only up or only down)
F01 - 3 - Push button for manual functions
F12 - Winding to a stored height (switching off the light button for the height)
F22 / F23 - Winding cycle for cover sheet film
F29 - Soft start cycle for edge protection application
Soft start cycle to reduce film tears on sharp pallet edges

FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE
via manually adjustable brake roller on the foil carriage
Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm
Standard connection values: 230 V - 1L+N+PE - 50 HZ
Total power: 1.2KW / 6A

Optionally available:
FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE
via electromagnetically braked roller
Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm
Standard connection values: 230 V - 1L+N+PE - 50 HZ
Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS)

Optionally available with a manual line formation.

Other systems available immediately from the Ludwigsburg warehouse.