Injection molding machine

Arburg 520 E 1500-400 m. Multilift u. Extras

All-electric injection molding machine with Multilift, conveyor belt, and safety fence from current production

Manufacturer: Arburg
Type: 520 E 1500-400
Control: Selogica
Year: 2022
Machine No.: 259303
Operating Hours: 12,182 h

Injection Unit
Injection unit/screw: 40 mm
Injection volume: 201 ccm
Injection weight: 184 g
Heating power: 9.7 kW
Heating zones: 5
Nozzle travel: 300 mm, 50 kN
Injection pressure: 2000 bar

Clamping Unit
Clear column spacing: 520 x 520 mm
Platen size: 695 x 695 mm
Clamping force: 150 tons / 1500 kN
Opening stroke: 450 mm
Maximum platen distance: 700-1000 mm
Minimum tool height: 250-550 mm
Ejector stroke: 175 mm / Ejector force: 40 kN

Weight: 7000 kg

Extras
• Thermoplastic processing
• Cylinder liner, highly wear-resistant
• Open nozzle 400 mm incl. heating band
• Nozzle tip, flat
• Servo-controlled nozzle travel
• Electrical connection for needle-gate nozzle
• Tool monitoring for ejector plate safety
• Protective device, open at the top
• Automatic central lubrication
• Volume flow for hydraulic core pulls: 60 l/min
• 2 x core pull control
Lredezn Av Ispfx Almsp
• 2 x blow-out
• Electrical mold height adjustment
• Cooling water with 6 free circuits
• Machine-specific cooling circuits, programmable
• Conveyor belt, electrically programmable
• Selection unit, good/bad
• Pneumatic maintenance unit

• Equipment packages
• Extended travel movements:
• Increase in the number of travel stages and intermediate stop functions
• Production control:
• Production control with temperature setpoint control and programmable alarm cycles
• Optimization/Operator Assistance: for adapting the machine to individual operational needs
• Quality assurance:
• Extends the standard quality monitoring and documentation:
• Options for process analysis
• Documentation with actual value protocol

• Boosting (starting the hot runner nozzles with temperature increase) - free melting
• Freely configurable page for start parameters (adjust cycles with other parameters instead of production parameters)
• Socket combination: 1x CEE and 1 x Schuko
• Socket distributor: (3x CEE and 3 x Schuko)
• 12 x electrical heating circuits, each with 2 kW (230V)
• Increased power for heating circuits 1-6 to 3.5 kW / 230V each
• Connected Systems (CPU Ethernet prepared for 4th service - remote maintenance)
• Robot interface Euromap 67
• Coloring interface

• Multilift Select / Transversal design, 6 kg handling weight
3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment as well as C-axis (folding axis) pneumatic
X, Y and Z-axis drives, servo-electric
z-1400 mm / X-400 mm / y-800 mm / c-pneumatic folding axis 0-90° 13 Nm / Weight 1.2 kg
with special equipment
X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis, end positions monitored
Clearance height increased by 200 mm

• Conveyor belt
• Safety fence

• 8 freely programmable inputs
• 1 interface with 4 freely programmable inputs and outputs

The machine is in top condition and can be inspected while powered on. From current production.
The machine is available in our warehouse immediately.

Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.