Circular sawing machines

Altendorf F 45 EvoDrive

You can get all common Altendorf models, including the F25, F35, WA80, and F45, as well as the Hand Guard machine in all variations.

Basic Equipment
Electrically driven height and tilt adjustment
0-46° with automatic cutting height correction
when tilting
Controls at eye level, tiltable
Double sliding table, table length 3,000 mm
Parallel stop, manually adjustable via
scale, including manual fine adjustment
Cutting width 1,000 mm, larger available upon request.

Angle stop with fixed 90° position,
manually adjustable via scale up to 3,200 mm
Maximum sawblade projection: 150 mm
Maximum sawblade diameter: 450 mm
Drive power: 4 kW (5.5 HP) at 4,000 rpm
AKE tool clamping system for the main sawblade
Working height: 91 cm

Motor: 5.5 kW (7.5 HP) with VARIO F45
- Continuously variable speed control from 2,000 - 6,000 rpm
- Precise speed adjustment to the material increases cutting quality and sawblade service life

Extended cutting height for one-sided tilting
This option is equipped with a large extraction hood for a maximum sawblade diameter of 550 mm and a maximum sawblade projection of 204 mm for one-sided tilting.

In combination with a scoring unit, the maximum saw blade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP).

2-axis scoring unit, single-axis tilting
With electric height and lateral adjustment, programmable scoring blade height
with quick lowering and quick raising,
drive motor 0.75 kW (1 HP), 8200 rpm.
Retrofitting only possible on machines prepared for a scoring unit.
LED lighting
With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked.
Dwjdpswf Hdgefx Aftjc

The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in their respective hard-chrome-plated guide rods. This smooth running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-hollow chamber system. The table surface is precisely planed and anodized. A hard-chrome-plated round rod, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication.

On/Off Switch on the Sliding Table
The on/off switch on the sliding table is always within easy reach. The four buttons turn both the main saw blade and the scoring unit on and off. This saves time and ensures greater safety.

Angle and miter stop, cutting to lengths up to 3500 mm
This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the tilt angle is continuously adjustable by 49° and is displayed on a scale.

Ask us about your dream machine and we will be happy to advise you.
We are happy to arrange viewings directly at the machine, in the factory, or with wood dust in the air.

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.