Wide belt sanderA.Costa
KKH-CCT+CCT 1350
Wide belt sander
A.Costa
KKH-CCT+CCT 1350
سال ساخت
۲۰۰۸
وضعیت
کارکرده
(کاملاً عملیاتی)
موقعیت
Trondheim 

اطلاعات پایه
- نام دستگاه:
- Wide belt sander
- تولید کننده:
- A.Costa
- مدل:
- KKH-CCT+CCT 1350
- سال ساخت:
- ۲۰۰۸
- وضعیت:
- آماده به کار (دست دوم)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
- موقعیت:
- Stokkanhaugen 116, 7048 Trondheim, Norway

تماس بگیرید
جزئیات فنی
جزئیات قدرت
ولتاژ ورودی:
۴۰۰ V
فرکانس ورودی:
۵۰ هرتز
نوع جریان ورودی:
تهویه مطبوع
جزئیات بیشتر
ارتفاع سنگزنی:
۱۶۰ میلیمتر
عرض سنگزنی:
۱٬۲۵۰ میلیمتر
جزئیات پیشنهاد
- شناسه آگهی:
- A23314455
- بهروزرسانی:
- آخرین بهروزرسانی در ۱۹.۰۸.۱۴۰۵
توضیحات
Working width 1250 mm.
Longitudinal sanding belt length mm. 2620
Standard working thickness mm. 3÷160
3 units from the bottom
3 units from the topp
First machine:
1st Bottom Working unit:
C250 - Working unit with cylinder ø mm. 250
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Bottom Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
Second machine:
1st Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with steel surface and helicoidal grooves for cooling C-steel
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Hjdpfx Aj Aiua Djk Ujfp
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
2nd Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Top Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily
interchangeable; depth of deployment mechanically adjustable
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180
SR - Rotary blowers for blowing the dust.
For technical specification please read included data sheet below.
This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.
Longitudinal sanding belt length mm. 2620
Standard working thickness mm. 3÷160
3 units from the bottom
3 units from the topp
First machine:
1st Bottom Working unit:
C250 - Working unit with cylinder ø mm. 250
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Bottom Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
Second machine:
1st Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with steel surface and helicoidal grooves for cooling C-steel
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Hjdpfx Aj Aiua Djk Ujfp
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
2nd Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Top Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily
interchangeable; depth of deployment mechanically adjustable
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180
SR - Rotary blowers for blowing the dust.
For technical specification please read included data sheet below.
This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.
اسناد
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2002
۵ آگهیهای آنلاین
ارسال درخواست
تلفن & فکس
+47 90 96... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
موفق
پیام شما ارسال شد.
آگهی کوچک
Kolding
۴٬۲۶۵ km
CSP ENGINEERINGPAR
موفق
پیام شما ارسال شد.
آگهی کوچک
Київ
۲٬۷۶۱ km
LEDINEKROTOLES 400 D – S
موفق
پیام شما ارسال شد.
آگهی کوچک
Saint-Nicolas-de-Redon
۴٬۹۲۵ km
SCMSandya CL3G RTT 110k
موفق
پیام شما ارسال شد.
آگهی کوچک
Kehra
۳٬۶۵۷ km
WeinigE3 infeed + A3 outfeed
موفق
پیام شما ارسال شد.
آگهی کوچک
Vall de Uxó
۴٬۸۴۳ km
دیسکهای چندگانه پلنگ آ.کاستا
A. CostaLeopard
A. CostaLeopard
موفق
پیام شما ارسال شد.
آگهی کوچک
Ben Arous
۳٬۹۷۸ km
CELASCHITSA5215 – TSA5218 – TSA5220
موفق
پیام شما ارسال شد.
آگهی کوچک
Kaunas
۳٬۴۱۳ km
DMCEuropa 110 RP
موفق
پیام شما ارسال شد.
آگهی کوچک
Knebel
۴٬۲۲۸ km
HOMAGFL 66/25/11 (1)
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است




































































































































