CNC turning and milling center

WFL Millturn M60 x 4500

WFL M60 x 4500 Turning, Milling and Drilling Center with 5 Axes
Manufacturer: WFL MILLTURN
Model: M60 x 4500
Location: Europe
Year of manufacture: 2005
Turning length: 4,500 mm
For all technical details of the machine, please refer to the attached technical documentation and photos. Below is a summary of the key specifications:

Lubrication and Cooling Systems
Central lubrication system
Tank capacity: 6 l
Oil type: ISO VG 68
Delivery rate: 0.5 l/min
Max. pressure: 27 bar
Minimum Quantity Lubrication (MQL)
Tank capacity: 6 l
Oil type: Klübersynth GH 6–100
Delivery rate: 0.5 l/min
Max. pressure: 27 bar

Pneumatic System
Air consumption: approx. 200 l/min
Operating pressure: 6 bar

Working Area
Nominal length (turning length): 4,500 mm
Swing diameter over bed (linear guide X-axis): 690 mm
Swing diameter over cross slide: 610 mm
Swing diameter over telescopic covers: 650 – 730 mm
Swing diameter over steady rest: 530 mm
Spindle center height from floor: 1,193 mm

Main Spindle
Spindle mount: DIN 55026, Type A, Size 11
Front bearing: Ø 160 mm
Rear bearing: Ø 150 mm
Spindle bore: Ø 115 mm
Draw tube passage: dependent on chuck type used

Main Drive
Motor power (100% duty cycle): 40 kW
Spindle torque (gear 1 / 2): 1,830 / 458 Nm
Total speed range: 8 – 3,300 rpm
Gear 1: 8 – 825 rpm
Gear 2: 33 – 3,300 rpm

Upper Slide (X/Z)
Feed force (Z / X): 2,000 daN
Ball screw drives (Z / X): 63 × 20 / 63 × 10 mm
Rapid traverse (Z / X): 20 / 15 m/min
Travel Z-axis: 4,650 mm
Travel X-axis: 700 mm (+670 / −30)

Milling and Drilling Unit
Max. spindle power: 25 kW
Max. spindle torque: 300 Nm
Front spindle diameter: 100 mm
Speed range: 10 – 4,000 rpm
Travel Y-axis: 300 mm (+175 / −125)
Rapid traverse Y-axis: 12.5 m/min
Feed force Y-axis: 1,500 daN
Hfjdex H Awfjpfx Adher
Ball screw drive Y: 40 × 5 mm
B-axis torque: 1,200 Nm
B-axis swivel range: 200° (−110° / +90°)
Tool holder: SANDVIK Capto C8

C-Axis
Max. speed: 25 rpm
Max. torque: 1,500 Nm
Smallest programmable increment: 0.001°
Clamping torque (disk brake): 4,000 Nm

This offer is non-binding and subject to prior sale. We are pleased to answer any questions, provide a more detailed specification of the equipment, or coordinate further details (e.g., clamping devices, tool package, commissioning, and training).

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.