Transfer Machine

WEMA Vogtland BTrPi 900/8

Technical details:

number of spindles: 15 Stück
number of stations: 8 Stück
control: PS 2000
total power requirement: 83,0 kW
weight of the machine ca.: 17,0 t
space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m
dimensions of machine: LxBxH: 2400x2800x2800 mm
dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm
dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm
dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm
dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm

TRANSFER MACHINE with 3 work station and 15 drill & mill spindles
- for example the production of a high quantity of armatures

Other technical information about the machine:
Dsdpfxju Idxre Aftoku
- workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec.
- drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm
- right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle
1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left
2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left

Equipment:
- 2 hydraulic aggregate
- chip conveyor
- belt filter produced by Filtertechnik Gera (fleece band 430mm)
- control panel
- manual switch
i.D.

*