Press brake

Weinbrenner WPS SERVO 20050

The environmentally friendly CNC servo press brakes from WEINBRENNER, model series WPS, represent a maximum
improvement on the previous hydraulic standard machines.
Up to 60 % energy savings and higher angular accuracy.
The tool holder corresponds to the AMADA system, as do the tools.
The stability of the press is optimized by the closed frame construction
To compensate for deflection, the press is equipped with a motorized, CNC-controlled table crowning system (System
WILA).
Technical data:
Maximum press capacity: 50 tons
Bending length: 2040 mm
Table width: 60 mm
Table width with WILA lower tool: 90 mm
Isdpfx Aasth U Edozeal
Table height from floor: 930 mm
Installation height: 590 mm
Max. Press stroke: 300 mm
Lowering speed: 150 mm/sec.
Pressing speed: 10 mm/sec.
Retraction speed: 150 mm/sec.
Max. utilization range backgauge (X axis): 750 mm
Max. utilization range backgauge (R axis): 160 mm
Adjustment speed of the backgauge in the X-axis, servomotor: 330 mm/sec.
Positioning accuracy of the backgauge: +/- 0.03 mm
Motor power: 2x 5.5 kW
Equipment / standard accessories:
- CNC control " ESA S875-2D". This enables easy graphic programming of products. After one
the control unit calculates the bending sequence and all axis positions (including collision warning), 15" TFT
color display touch screen, USB interface, network connection, tool directory for 50 punches and dies each.
Graphic 2D programming, 2D display while working, maximum 4 axes + auxiliary functions.
- Arm adjustable in height and sideways in 2 axes for ergonomic and convenient operation of the CNC control.
- Split upper tool, "Amada" system, manufacturer Italy, material C 50 (HRC 50-52) induction-hardened and ground on the working surfaces.
ground on the working surfaces. Load capacity: 100 to per meter. Standard delivery: Pitch: 2 x 835 mm, horn left and right each
100 mm each, rest in smaller pitch. Height 66.6 mm
- Bottom tool / 4-fold prism cube CroMo 4, ground 60x60 mm, V-openings standard: 16 - 22 - 35 - 50 mm
- 2-axis backgauge "X - R", AC servomotors, travel: X=0 mm, R=160 mm, positioning accuracy + / - 0.03 mm,
Travel speed: 330 mm / sec. Including 3 laterally adjustable stop fingers
- Laser protection "FIESSLER" with 2-fold beam, type AKAS / LCII, operation of the press only possible with foot pedal.
- Automatic motorized table crowning system WILA, integrated in the CNC
- front sheet supports (2 pieces) can be moved laterally via linear guide, height adjustment with handwheel.
Equipped with wide brush supports
- German operating instructions with spare parts list
- CE conformity

آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.