Lead/traction spindle latheWeiler
Primus GS
Lead/traction spindle lathe
Weiler
Primus GS
VB به اضافه مالیات بر ارزش افزوده
€۱۴٬۵۰۰
وضعیت
کارکرده
موقعیت
Ubstadt-Weiher 

تصاویر نشان میدهند
نمایش نقشه
اطلاعات دستگاه
- نام دستگاه:
- Lead/traction spindle lathe
- تولید کننده:
- Weiler
- مدل:
- Primus GS
- وضعیت:
- بسیار خوب (کارکرده)
- قابلیت عملکرد:
- کاملاً عملیاتی
قیمت و مکان
VB به اضافه مالیات بر ارزش افزوده
€۱۴٬۵۰۰
- موقعیت:
- Großer Sand 19-21, 76698 Ubstadt-Weiher, DE
تماس بگیرید
جزئیات پیشنهاد
- شناسه آگهی:
- A19143361
- بهروزرسانی:
- آخرین بهروزرسانی در ۲۴.۰۲.۱۴۰۴
توضیحات
Weiler Primus GS guide and feed spindle lathe in very good original condition!
Technical specifications:
>> Year of manufacture approx. 1992 Machine no. 4549
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Switchable spindle brake
>> Weight approx. 360 kg
Iodpfx Acswkh Abeyoih
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> New collet chuck system, new collets from 3 to 25 mm
>> 1 piece Three-jaw chuck with 2 sets of jaws
>> Mulifix size A with 2 tool holders
About the machine:
Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Technical specifications:
>> Year of manufacture approx. 1992 Machine no. 4549
>> Center height 120 mm
>> Center width 430 mm
>> Speed: 60 - 3000 rpm in 18 gear steps
>> Spindle bore 23 mm
>> Short taper spindle head DIN 4
>> Tailstock MT 2
>> Feed rates from 0.03 to 0.15 mm/rev
>> Possible thread sizes: metric, inch, module, and diametrical pitch
>> Metric thread pitches from 0.25 to 2.5 mm
>> Switchable spindle brake
>> Weight approx. 360 kg
Iodpfx Acswkh Abeyoih
>> Length 1.2 m, height 1.3 m, depth 0.65 m
Accessories and equipment:
>> New collet chuck system, new collets from 3 to 25 mm
>> 1 piece Three-jaw chuck with 2 sets of jaws
>> Mulifix size A with 2 tool holders
About the machine:
Offered is a Weiler Primus GS guide and feed spindle lathe in very good original condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in excellent condition. The Weiler runs very quietly even at high speeds. The Primus was used in a training facility. This newer generation of Weiler lathes is very user-friendly and can produce surfaces that look as if they were ground. Take advantage of the opportunity to view this machine on-site with power on and see for yourself its condition.
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
توجه: به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.
ثبت شده از: 2007
ارسال درخواست
تلفن & فکس
+49 7251 ... آگهیها
این آگهیها ممکن است برای شما نیز جالب باشند.
آگهی کوچک

۴٬۱۱۹ km
WEILERLZ PRIMUS GS
آگهی کوچک

۴٬۰۱۲ km
WEILERPrimus GS 4443
آگهی کوچک

۴٬۱۵۲ km
WeilerPrimus GS
آگهی شما با موفقیت حذف شد
یک خطا رخ داده است