Weiler E55X1000

Weiler E55X1000

Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details.

• 20 kW = real power (mechanical/electrical output)
• 27 kVA = apparent power (includes reactive power)
• Internal taper: metric 90
• Spindle diameter in front bearing: 120 mm
• Spindle bore: 83 mm
• Max. faceplate diameter: 500 mm
• Maximum chuck diameter: 315 mm
• Maximum torque: 1600 Nm
• Tool system: turret (VDI 40)
• Tool shank size: 32 x 25 mm
• Number of longitudinal slides: 1
• Number of cross slides: 1
• Center distance: 1100
• Cross travel: 340 mm
• Tailstock taper: MK 5
• Tailstock quill diameter: 80 mm
• Tailstock quill stroke: 200 mm
• Maximum tailstock travel: 1000 / 2000 mm
• Feed rate longitudinal: 0.001 – 20 mm/rev
• Feed rate cross: 0.001 – 20 mm/rev
• Rapid traverse longitudinal: 10 m/min
• Rapid traverse cross: 5 m/min
• Feed force longitudinal: 10000 N
• Feed force cross: 7000 N
• Metric thread range: 0.1 – 250 mm
• Whitworth thread range: 1/4 – 56 threads/inch
• Module range: 0.125 – 28
• DP range: 0.05 – 48
• Maximum cutting cross section: 2.25 mm²
• Cutting speed: 140 m/min
Bodpfx Asy Em Avsm Uoli
• Gear stage I: 89 rpm at 100% duty cycle
• Gear stage II: 355 rpm at 100% duty cycle
• Coolant consumption (normal): 30 l/min at 0.4 bar
• Coolant consumption (increased): 30 l/min at 3.5 bar
• Noise level: 80 dB(A)
• Electrical:
• Operating voltage: 400 V
• Control voltage: DC 24 V
• Connected load: 30 kVA
• Nominal current: 43 A
• Frequency: 50 Hz
• Main fuses: 50 A
• Condition note: A small actuator that switches between the gear stages is defective; both gear stages are functioning.

Additional equipment

• Chip conveyor

Technical Specification
Counter Spindle No
Driven Tools No