Weiler E35 D

Weiler E35 D

Horizontal turning machine manufactured in 1999. This Weiler E35 D features a Siemens Sinumerik 810D control with Weiler D1 user software and a 12.1-inch TFT color flat screen. It includes a coolant unit with a flow rate of 30 l/min and a tool holder for quick-change operations. If you are looking to get high-quality turning capabilities, consider the Weiler E35 D machine we have for sale. Contact us for further details.

• Control: Siemens Sinumerik 810D with Weiler D1 user software
• Center distance: 950 mm
• Turning length: 950 mm
• Swing over bed: 410 mm
• Swing over cross slide: 200 mm
• Bed width: 330 mm
• Cross slide travel: 230 mm
Nedpjy Nlvcofx Acwewk
• Top slide travel: 120 mm
• Tailstock quill diameter: 65 mm
• Tailstock quill stroke: 120 mm
• Tailstock internal taper: MK 4
• Feed force (longitudinal/transverse): 8000 N / 5000 N
• Rapid traverse (longitudinal/transverse): 10/5 m/min
• Tool cross-section: 25x25 mm
• Display: 12.1-inch TFT color flat screen
• Drive power (60/100% duty cycle): 11/9 kW
• Dimensions (L x W x H): 2300 mm x 1400 mm x 1700 mm
• Weight: 2100 kg
• Spindle speed range (1st stage): 1-750 rpm
• Spindle speed range (2nd stage): 4-3000 rpm
• Max. torque at spindle: 700 Nm
• Spindle mount (DIN 55027): Size 6
• Spindle diameter (front bearing): 90 mm
• Spindle bore: 54 mm
• Spindle taper: MK 6
• Operating voltage: 400 V
• Control voltage: 24 V
• Connected load: 14 kW
• Nominal current: 26 A
• Frequency: 50 Hz
• Main fuses: 35 A
• Coolant unit: 30 l/min at 0.4 bar
• Tool holder: Multifix quick-change size B
• Features: Teach-in functions; graphic-supported contour programming; V-24 interface; electronic handwheel for manual contour following

Additional equipment

• Included accessories: 1 change holder; fixed center point; spindle plug; key set; manuals; chip protection wall; movable splash guard; chuck guard with limit switch monitoring
• Optional equipment included: Fixed steady rest with roller jaws (12–150 mm); adjustable hollow spindle stop; lever-operated collet chuck for DIN 6343-48 (173E)

Technical Specification
Counter Spindle No
Driven Tools No
Through-spindle Coolant No