Rod machining centerWegoma
        SZ 500    
 Rod machining center
Wegoma
        SZ 500    
                سال ساخت            
                ۲۰۲۵            
            وضعیت        
            جدید                    
            موقعیت        
                                                Besigheim                                            

 تصاویر نشان میدهند            
 نمایش نقشه            
اطلاعات دستگاه
قیمت و مکان
- موقعیت:
 -             Heinrich Hertz Str. 3-5, 74354 Besigheim, DE                

 
 تماس بگیرید            
جزئیات پیشنهاد
- شناسه آگهی:
 - A20438965
 
- بهروزرسانی:
 - آخرین بهروزرسانی در ۱۲.۰۸.۱۴۰۴
 
توضیحات
        The 5-axis machine is designed for the industrial machining of aluminium and steel profiles with large volume and weight. The machine is equipped with a 450 mm saw blade.
Window construction profiles, special fabrications, façade profiles, and steel profiles are suitable for processing on this machining centre.
The frame is made of a welded construction that is mechanically machined. The material thickness of the frame exceeds 14 millimetres to ensure a flat surface and to avoid deformation during transport and/or movement of the machine. The frame is fitted with 12 adjustable steel feet that adapt to any type of flooring, each equipped with rubber pads to prevent the transmission of vibrations to the floor. A movable carriage made from welded steel tubing is mounted on the frame and connected via multiple supports to guarantee maximum stability and to prevent deflection of the support even during demanding operations on steel or other high-strength materials.
Machining area X: 7,100 mm
Machining area Y: 460 mm (4 axes)
Bsdpfx Aajxt D Szohslp
Machining area Z: 300 mm
Machining axis A: 180°
Machining axis C: 360°
Maximum speed X: 90 m/min
Maximum speed Y: 60 m/min
Maximum speed Z: 30 m/min
Maximum speed A: 3,600°/min
Maximum speed C: 1,800°/min
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
Window construction profiles, special fabrications, façade profiles, and steel profiles are suitable for processing on this machining centre.
The frame is made of a welded construction that is mechanically machined. The material thickness of the frame exceeds 14 millimetres to ensure a flat surface and to avoid deformation during transport and/or movement of the machine. The frame is fitted with 12 adjustable steel feet that adapt to any type of flooring, each equipped with rubber pads to prevent the transmission of vibrations to the floor. A movable carriage made from welded steel tubing is mounted on the frame and connected via multiple supports to guarantee maximum stability and to prevent deflection of the support even during demanding operations on steel or other high-strength materials.
Machining area X: 7,100 mm
Machining area Y: 460 mm (4 axes)
Bsdpfx Aajxt D Szohslp
Machining area Z: 300 mm
Machining axis A: 180°
Machining axis C: 360°
Maximum speed X: 90 m/min
Maximum speed Y: 60 m/min
Maximum speed Z: 30 m/min
Maximum speed A: 3,600°/min
Maximum speed C: 1,800°/min
آگهی به صورت خودکار ترجمه شده است. احتمال بروز اشتباه در ترجمه وجود دارد.
تأمینکننده
            توجه:        به صورت رایگان ثبتنام کنید یا وارد شوید, تا به تمام اطلاعات دسترسی داشته باشید.    
ارسال درخواست
تلفن & فکس
                            +49 7245 ... آگهیها                
            آگهی شما با موفقیت حذف شد            
            یک خطا رخ داده است            


